Flow field characteristics of an afterburner blown diffuser based on active flow control
Physics of Fluids · 01.06.2025 · 37 (6)
DOI: 10.1063/5.0271008 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 16.06.2025. Verfasst von Zhixiang Zhu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Gefördert von: National Science and Technology Major Project.
Abstract (Originalsprache)
The diffuser plays a critical role in enabling efficient combustion in an aeroengine afterburner by decelerating and pressurizing airflow. However, deteriorating diffuser inlet conditions and structural size limitations have made flow separation more likely to occur within the diffuser. This study explores an active control method using boundary layer blowing to suppress flow separation in the diffuser. An afterburner blown diffuser is designed and experiments are conducted to determine the effects of divergence angles (12°, 15°, 18°, and 24°) and blowing flow ratios (0%–5.48%) on the internal flow characteristics. The results indicate that the effect of the blowing flow ratio are not always consistent across different divergence angles. For relatively smaller divergence angles (e.g., 12°, 15°, and 18°), a moderate blowing flow ratio can effectively suppress the onset of flow separation, but excessive blowing flow ratio induces flow separation on the opposite wall. At larger divergence angle (e.g., 24°), the diffuser exhibits four distinct flow patterns as the blowing flow ratio increases, which differ completely from those observed at the other three divergence angles. At this divergence angle, the size of the separation vortex within the diffuser decreases as the blowing flow ratio increases, and its position shifts significantly. Based on the study of the flow characteristics of the diffuser at various divergence angles, six flow patterns within the afterburner blown diffuser are summarized, and the changes in flow patterns are analyzed. Despite multiple flow patterns, total pressure loss decreases with increasing blowing flow ratio across all divergence angles.
Förderung
- National Science and Technology Major Project
Zitieren
APA
Zhu, Z., Huang, Y., Zhu, H., Zhao, H., Zeng, R., & He, X. (2025). Flow field characteristics of an afterburner blown diffuser based on active flow control. Physics of Fluids, 37(6). https://doi.org/10.1063/5.0271008
Vancouver
Zhu Z, Huang Y, Zhu H, Zhao H, Zeng R, He X. Flow field characteristics of an afterburner blown diffuser based on active flow control. Physics of Fluids. 2025;37(6). doi:10.1063/5.0271008
BibTeX
@article{Zhu2025,
author = {Zhu, Zhixiang and Huang, Yakun and Zhu, Huanyu and Zhao, Haoyuan and Zeng, Rong and He, Xiaomin},
title = {Flow field characteristics of an afterburner blown diffuser based on active flow control},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {6},
doi = {10.1063/5.0271008}
}
EUVIMED