Dynamic wheel–rail adhesion characteristics on wet curved tracks considering surface roughness
Physics of Fluids · 01.02.2025 · 37 (2)
DOI: 10.1063/5.0252179 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 03.02.2025. Verfasst von Zhaoyang Wang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Research Fund of CRCC Corporation Limited.
Abstract (Originalsprache)
Wheel–rail rolling contact is a complex tribological issue, especially the existence of a thin water film on the rail surface, which leads to low adhesion problems for the traction and braking performance of the railway trains. The objective of this paper is to propose a non-Hertzian dynamic wheel–rail adhesion model for trains passing through wet curved tracks considering wheel–rail surface roughness. A vehicle-track coupling dynamics model was first developed to output the wheel–rail dynamic contact parameters under wet conditions. These parameters were subsequently utilized as dynamic inputs for the present wheel–rail adhesion model to simulate dynamic curve passing. The present numerical model includes the normal contact model and tangential model. For the normal contact issue, an elastohydrodynamic lubrication model was used to accurately determine the normal contact stress within the contact patch along the contact traces. Based on the normal contact characteristics, the advanced extended creep force model was used to compute the tangential stress. Finally, the dynamic wheel–rail adhesion coefficient can be obtained. This model considers the effects of time variation and changes in contact geometry, resulting in sudden increases or decreases in the adhesion coefficient at certain locations. At a speed of 400 km/h, a higher spin creepage occurs, leading to an increased displacement of the third-body layer and causing the maximum tangential stress to shift from one side of the contact patch to the other. Under the combined influence of the creepages, the maximum tangential stress occurs at the trailing edge of the contact patch.
Förderung
- National Natural Science Foundation of China
- Research Fund of CRCC Corporation Limited
Zitieren
APA
Wang, Z., Wu, B., Huang, J., Ji, Y., Li, D., & Wu, S. (2025). Dynamic wheel–rail adhesion characteristics on wet curved tracks considering surface roughness. Physics of Fluids, 37(2). https://doi.org/10.1063/5.0252179
Vancouver
Wang Z, Wu B, Huang J, Ji Y, Li D, Wu S. Dynamic wheel–rail adhesion characteristics on wet curved tracks considering surface roughness. Physics of Fluids. 2025;37(2). doi:10.1063/5.0252179
BibTeX
@article{Wang2025,
author = {Wang, Zhaoyang and Wu, Bing and Huang, Jiaqing and Ji, Yuanjin and Li, Dingkang and Wu, Shuai},
title = {Dynamic wheel–rail adhesion characteristics on wet curved tracks considering surface roughness},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {2},
doi = {10.1063/5.0252179}
}
EUVIMED