Numerical investigation of wheel‐rail adhesion using a simplified three‐dimensional model considering surface roughness and temperature
Lubrication Science · 2024-03 · 36 (2) · 88-103
DOI: 10.1002/ls.1677 ↗Kurz gefasst
Fachartikel in der Zeitschrift Lubrication Science, online erschienen am 17.09.2023. Verfasst von Jiaqing Huang und 3 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 32 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Wheel‐rail adhesion is important to the traction and braking of railway vehicles. This paper develops a three‐dimensional numerical model considering surface roughness and temperature to investigate water‐contaminated adhesion characteristics. A simplified elastohydrodynamic lubrication model considering the thermal effect is developed to obtain the normal load carried by liquid film and asperities. Meanwhile, a third body layer (3BL) model, which considers the effects of pressure and temperature on 3BL, is used to calculate the tangential stress and friction coefficient of asperity contact. To verify the numerical model, firstly, the results are compared with the existing experimental results at low and high speeds. In addition, the effects of surface roughness and temperature on adhesion coefficient are investigated. Furthermore, the elastoplastic behaviour of the tangential stress and the adhesion characteristics for large creepages are studied. The obtained adhesion‐creepage curve can represent the decreasing trend after reaching saturation because of temperature.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Huang, J., Wu, B., Xiao, G., & Shen, Q. (2024). Numerical investigation of wheel‐rail adhesion using a simplified three‐dimensional model considering surface roughness and temperature. Lubrication Science, 36(2), 88-103. https://doi.org/10.1002/ls.1677
Vancouver
Huang J, Wu B, Xiao G, Shen Q. Numerical investigation of wheel‐rail adhesion using a simplified three‐dimensional model considering surface roughness and temperature. Lubrication Science. 2024;36(2):88-103. doi:10.1002/ls.1677
BibTeX
@article{Huang2024,
author = {Huang, Jiaqing and Wu, Bing and Xiao, Guangwen and Shen, Quan},
title = {Numerical investigation of wheel‐rail adhesion using a simplified three‐dimensional model considering surface roughness and temperature},
journal = {Lubrication Science},
year = {2024},
volume = {36},
number = {2},
pages = {88--103},
doi = {10.1002/ls.1677}
}
EUVIMED