Validation of galvanomagnetic and thermomagnetic transport measurements using Standard Reference Material 3451
Review of Scientific Instruments · 01.11.2024 · 95 (11)
DOI: 10.1063/5.0235568 ↗Kurz gefasst
Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 20.11.2024. Verfasst von Matt Beekman und 11 weiteren Autor:innen. Beteiligte Einrichtung: Department of Physics, California Polytechnic State University, San Luis Obispo, California 93407, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: California Polytechnic State University, San Luis Obispo, Basic Energy Sciences, National Science Foundation Graduate Research Fellowship Program.
Abstract (Originalsprache)
In the “method of four coefficients,” electrical resistivity (ρ), Seebeck coefficient (S), Hall coefficient (RH), and Nernst coefficient (Q) of a material are measured and typically fit or modeled with theoretical expressions based on Boltzmann transport theory to glean experimental insights into features of electronic structure and/or charge carrier scattering mechanisms in materials. Although well-defined and readily available reference materials exist for validating measurements of ρ and S, none currently exists for RH or Q. We show that measurements of all four transport coefficients—ρ, S, RH, and Q—can be validated using a single reference sample, namely, the low-temperature Seebeck coefficient Standard Reference Material® (SRM) 3451 (composition Bi2Te3+x) available from the National Institute for Standards and Technology (NIST) without the need for inter-laboratory sample exchange. RH and Q data for NIST SRM 3451 reported here for the temperature range 80–400 K complement the data already available for ρ and S and will therefore be of interest to researchers desiring to validate new or existing galvanomagnetic and thermomagnetic transport properties measurement systems.
Autor:innen und Institutionen
- Department of Physics, California Polytechnic State University, San Luis Obispo, California 93407, USA.
- Department of Mechanical and Materials Engineering, University of Cincinnati, Cincinnati, Ohio 45221, USA.
ORCID-Profile: Matt Beekman, Andrew Jarymowycz, Matthew Leibowitz, Travis Nichols, Roger Dorris, Kyle Thomson, Sarah J Watzman, Katherine A Schlaak
Förderung
- California Polytechnic State University, San Luis Obispo
- Basic Energy Sciences
- National Science Foundation Graduate Research Fellowship Program
Zitieren
APA
Beekman, M., Benedetti, M., Dominguez, D., Hewett-Abbott, H., Jarymowycz, A., Leibowitz, M., Nichols, T., Dorris, R., Thomson, K., Watzman, S. J., Gibson, T., & Schlaak, K. A. (2024). Validation of galvanomagnetic and thermomagnetic transport measurements using Standard Reference Material 3451. Review of Scientific Instruments, 95(11). https://doi.org/10.1063/5.0235568
Vancouver
Beekman M, Benedetti M, Dominguez D, Hewett-Abbott H, Jarymowycz A, Leibowitz M, et al. Validation of galvanomagnetic and thermomagnetic transport measurements using Standard Reference Material 3451. Review of Scientific Instruments. 2024;95(11). doi:10.1063/5.0235568
BibTeX
@article{Beekman2024,
author = {Beekman, Matt and Benedetti, Matteo and Dominguez, Deja and Hewett-Abbott, Hayden and Jarymowycz, Andrew and Leibowitz, Matthew and Nichols, Travis and Dorris, Roger and Thomson, Kyle and Watzman, Sarah J and Gibson, Thu and Schlaak, Katherine A},
title = {Validation of galvanomagnetic and thermomagnetic transport measurements using Standard Reference Material 3451},
journal = {Review of Scientific Instruments},
year = {2024},
volume = {95},
number = {11},
doi = {10.1063/5.0235568}
}
EUVIMED