EUVIMEDEUVIMED entdecken
Crossref

Figure correction of a Wolter mirror master mandrel by organic abrasive machining

Satoru Egawa iD, Yusuke Matsuzawa iD, Kentaro Hiraguri iD, Hiroto Motoyama iD, Gota Yamaguchi iD, Shunya Yokomae iD, Yoshinori Takei iD, Takehiro Kume iD, Shigeki Owada iD, Kensuke Tono iD, Makina Yabashi iD, Hirokazu Hashizume iD und 1 weitere

Review of Scientific Instruments · 01.05.2023 · 94 (5)

DOI: 10.1063/5.0145122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Review of Scientific Instruments, online erschienen am 17.05.2023. Verfasst von Satoru Egawa und 12 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Advanced Science and Technology, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904, Japan. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 25 Literaturangaben. Gefördert von: Japan Society for the Promotion of Science.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, figure correction of a master mandrel of a Wolter mirror by organic abrasive machining (OAM) was demonstrated. In OAM, a flow of slurry, dispersed with organic particles, locally removes the surface of a workpiece in contact with a rotating machining tool. A computer-controlled machining system was used to perform the selective removal of a fused silica surface at a spatial resolution of 200 µm. A master mandrel of a Wolter mirror for soft x-ray microscopes was fabricated with a figure accuracy of <1 nm root mean square, which is sufficient for diffraction-limited imaging at a wavelength of 10 nm.

Autor:innen und Institutionen

  • Research Center for Advanced Science and Technology, The University of Tokyo, 4-6-1 Komaba, Meguro-ku, Tokyo 153-8904, Japan.
  • Technology Center, Natsume Optical Corporation, 1200-29 Kawaji, Iida, Nagano 399-2431, Japan.
  • RIKEN SPring-8 Center, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148, Japan.
  • National Institute of Advanced Industrial Science and Technology (AIST), National Metrology Institute of Japan (NMIJ), AIST 3, Umezono, Tsukuba 305-8563, Japan.
  • Japan Synchrotron Radiation Research Institute (JASRI), 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198, Japan.

ORCID-Profile: Satoru Egawa, Yusuke Matsuzawa, Kentaro Hiraguri, Hiroto Motoyama, Gota Yamaguchi, Shunya Yokomae, Yoshinori Takei, Takehiro Kume, Shigeki Owada, Kensuke Tono, Makina Yabashi, Hirokazu Hashizume, Hidekazu Mimura

Förderung

  • Japan Society for the Promotion of Science

Zitieren

APA

Egawa, S., Matsuzawa, Y., Hiraguri, K., Motoyama, H., Yamaguchi, G., Yokomae, S., Takei, Y., Kume, T., Owada, S., Tono, K., Yabashi, M., Hashizume, H., & Mimura, H. (2023). Figure correction of a Wolter mirror master mandrel by organic abrasive machining. Review of Scientific Instruments, 94(5). https://doi.org/10.1063/5.0145122

Vancouver

Egawa S, Matsuzawa Y, Hiraguri K, Motoyama H, Yamaguchi G, Yokomae S, et al. Figure correction of a Wolter mirror master mandrel by organic abrasive machining. Review of Scientific Instruments. 2023;94(5). doi:10.1063/5.0145122

BibTeX
@article{Egawa2023,
  author = {Egawa, Satoru and Matsuzawa, Yusuke and Hiraguri, Kentaro and Motoyama, Hiroto and Yamaguchi, Gota and Yokomae, Shunya and Takei, Yoshinori and Kume, Takehiro and Owada, Shigeki and Tono, Kensuke and Yabashi, Makina and Hashizume, Hirokazu and Mimura, Hidekazu},
  title = {Figure correction of a Wolter mirror master mandrel by organic abrasive machining},
  journal = {Review of Scientific Instruments},
  year = {2023},
  volume = {94},
  number = {5},
  doi = {10.1063/5.0145122}
}
Kostenlos starten →