A review of additives in abrasive water jet machining and their performance
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology · 2023-04 · 237 (4) · 964-978
DOI: 10.1177/13506501221144722 ↗Kurz gefasst
Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, online erschienen am 21.12.2022. Verfasst von M. Sreekumar und 4 weiteren Autor:innen. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 113 Literaturangaben.
Abstract (Originalsprache)
Abrasive Water Jet Machining (AWJM) is an advanced machining process that has a variety of applications, including machining of hard-to-machine materials, drilling, milling, coating removal, polishing, etc. They are attractive because of their versatility, absence of heat-affected zones, low thermal-distortions, low cutting-forces, and environment-friendly nature. However, use of plain-water in AWJM poses some problems due to lack of jet coherence, poor suspension characteristics, and unsatisfactory performances in submerged-cutting and cutting of hollow surfaces. Countering these problems appropriately can lead to better cutting performances in terms of material removal rate, depth of cut, kerf-width, and kerf-taper. It can be achieved with addition of some additives in abrasive water-jet. These additives are mostly polymers of high molecular mass, which increases viscosity, suspension capability, and stability of jet, while reducing drag. In addition to AWJM, the effect of polymeric-additives in other water-based jets like Abrasive-Slurry-Jet (ASJ), High-pressure ASJ, etc. are also discussed. Therefore, this study aims to identify and list of different additives that are used in AWJM and other water-jet-based machining-processes over a past few decades, and to provide a run-through on their performances. It can provide the significant information to researchers working in fields related to waterjets.
Zitieren
APA
Sreekumar, M., Purushothaman, S., Srinivas, M. S., Katiyar, J. K., & Sankar, M. R. (2023). A review of additives in abrasive water jet machining and their performance. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 237(4), 964-978. https://doi.org/10.1177/13506501221144722
Vancouver
Sreekumar M, Purushothaman S, Srinivas MS, Katiyar JK, Sankar MR. A review of additives in abrasive water jet machining and their performance. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 2023;237(4):964-978. doi:10.1177/13506501221144722
BibTeX
@article{Sreekumar2023,
author = {Sreekumar, M. and Purushothaman, S. and Srinivas, M. S. and Katiyar, J. K. and Sankar, M. R.},
title = {A review of additives in abrasive water jet machining and their performance},
journal = {Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology},
year = {2023},
volume = {237},
number = {4},
pages = {964--978},
doi = {10.1177/13506501221144722}
}
EUVIMED