EUVIMEDEUVIMED entdecken
Crossref

Reducing Displacements in Thermoset 3D-Printed Formwork by Optimizing Ribs and Tie-Rod Placement

Zuffain Hussan, Marco Brander, Berin Šeta, Jon Spangenberg, Sebastian Andersen, Gregor Fischer

Journal of Structural Engineering · 01.01.2027 · 153 (1)

DOI: 10.1061/jsendh.steng-16420 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Structural Engineering, erschienen am 01.01.2027. Verfasst von Zuffain Hussan und 5 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Three-dimensional (3D)-printed formwork offers strong potential for concrete casting, creating complex shapes while reducing costs, labor, waste, and material use. A challenge arises when the formwork exhibits excessive displacement under fresh concrete pressure. This study presents an optimization framework for 3D-printed thermoset formwork to minimize material usage subject to a displacement constraint. The ground structure method (GSM) is integrated to optimize the rib layout, while tie-rod placement is optimized separately. Their combination further reduces material usage while maintaining the displacement constraint. This approach differs from conventional formwork reinforcement strategies, focusing on thermoset materials for their strong interlayer bonding and improved thermal and chemical resistance. Optimized designs are developed through finite-element (FE) modeling and validated using three-dimensional digital image correlation (3D-DIC). Concrete pressure tests using self-compacting concrete (SCC) demonstrated the effectiveness of these optimized designs. Three configurations were tested: a GSM ribbed plate, a tie-rod optimized plate, and a combined rib and tie-rod plate. Results demonstrated the effectiveness of the combined configuration, achieving an 82% reduction in maximum displacement with only a 10.7% increase in material mass compared with a nonribbed plate. The difference between the FE simulation and experimental results was within 10%–13% for all plates. Additionally, testing over 24 h showed that displacement remained stable across all configurations. This research provides valuable insights for the construction industry by establishing a validated framework for optimizing 3D-printed formwork, achieving displacement reduction and improved material efficiency in formwork structures.

Zitieren

APA

Hussan, Z., Brander, M., Šeta, B., Spangenberg, J., Andersen, S., & Fischer, G. (2027). Reducing Displacements in Thermoset 3D-Printed Formwork by Optimizing Ribs and Tie-Rod Placement. Journal of Structural Engineering, 153(1). https://doi.org/10.1061/jsendh.steng-16420

Vancouver

Hussan Z, Brander M, Šeta B, Spangenberg J, Andersen S, Fischer G. Reducing Displacements in Thermoset 3D-Printed Formwork by Optimizing Ribs and Tie-Rod Placement. Journal of Structural Engineering. 2027;153(1). doi:10.1061/jsendh.steng-16420

BibTeX
@article{Hussan2027,
  author = {Hussan, Zuffain and Brander, Marco and Šeta, Berin and Spangenberg, Jon and Andersen, Sebastian and Fischer, Gregor},
  title = {Reducing Displacements in Thermoset 3D-Printed Formwork by Optimizing Ribs and Tie-Rod Placement},
  journal = {Journal of Structural Engineering},
  year = {2027},
  volume = {153},
  number = {1},
  doi = {10.1061/jsendh.steng-16420}
}
Kostenlos starten →