Antimicrobial Effect of Zinc Oxide Nanoparticle Coating on Titanium 6 Aluminum 4 Vanadium (Ti-6Al-4V)-Fixed Orthodontic Retainer Substrate
European Journal of General Dentistry · 01.05.2025 · 14 (02) · 142-153
DOI: 10.1055/s-0044-1789242 ↗Kurz gefasst
Fachartikel in der Zeitschrift European Journal of General Dentistry, erschienen am 01.05.2025. Verfasst von Shahbaa A. Mohammed und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objectives
Due to its excellent biocompatibility, superior mechanical qualities, and exceptional corrosion resistance, titanium 6 aluminum 4 vanadium (Ti-6Al-4V) alloy is frequently used for medical and orthodontic purposes as a fixed retainer after active orthodontic treatment. Titanium lacks the antibacterial characteristics and is bioinert, this may influence the usage of such materials in the field of biomedical applications. Bacterial adhesion to the orthodontic retainer surface is a common first step in infection; this is followed by bacterial colonization ending with the formation of a biofilm. Once biofilm forms, it is highly resistant to medicines and the host immune system's defense mechanism, making it difficult to remove the biofilm from orthodontic retainer. This study aimed to test the antimicrobial effect of a zinc oxide (ZnO) nanoparticle coating on Ti-6Al-4V orthodontic retainers. Materials and Methods ZnO nanoparticles, with a particle size of 10 to 30 nm, were used to coat the alloy using the electrophoretic deposition method. Various parameters and surface characterization tests were employed to obtain an optimized sample. This sample was subjected to the microbial adherence optical density test to examine the adherence of Streptococcus mutans, Lactobacillus acidophilus bacteria, and Candida albicans.
Results
The optimized sample had a 5-mg/L ZnO concentration, applied voltage of 50 V, and a 1-cm distance between electrodes. The ZnO coating significantly reduced microbial adherence compared to uncoated samples, effectively inhibiting bacterial development.
Conclusion
Electrophoretic deposition is an efficient and cost-effective technique for coating orthodontic titanium retainer substrates. Coating Ti-6Al-4V with ZnO nanoparticles increased the antimicrobial effectiveness of the material and as the concentration of the nanoparticles rises, the antimicrobial effect increases too.
Zitieren
APA
Mohammed, S. A., Nahidh, M., Khalaf, M. K., Marrapodi, M. M., Cicciù, M., & Minervini, G. (2025). Antimicrobial Effect of Zinc Oxide Nanoparticle Coating on Titanium 6 Aluminum 4 Vanadium (Ti-6Al-4V)-Fixed Orthodontic Retainer Substrate. European Journal of General Dentistry, 14(02), 142-153. https://doi.org/10.1055/s-0044-1789242
Vancouver
Mohammed SA, Nahidh M, Khalaf MK, Marrapodi MM, Cicciù M, Minervini G. Antimicrobial Effect of Zinc Oxide Nanoparticle Coating on Titanium 6 Aluminum 4 Vanadium (Ti-6Al-4V)-Fixed Orthodontic Retainer Substrate. European Journal of General Dentistry. 2025;14(02):142-153. doi:10.1055/s-0044-1789242
BibTeX
@article{Mohammed2025,
author = {Mohammed, Shahbaa A. and Nahidh, Mohammed and Khalaf, Mohammed K. and Marrapodi, Maria Maddalena and Cicciù, Marco and Minervini, Giuseppe},
title = {Antimicrobial Effect of Zinc Oxide Nanoparticle Coating on Titanium 6 Aluminum 4 Vanadium (Ti-6Al-4V)-Fixed Orthodontic Retainer Substrate},
journal = {European Journal of General Dentistry},
year = {2025},
volume = {14},
number = {02},
pages = {142--153},
doi = {10.1055/s-0044-1789242}
}
EUVIMED