EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrojet Surface Treatment of Ti-6Al-4V Titanium Produced by Additive Manufacturing

Monika Szada-Borzyszkowska iD, Dorota Laskowska iD, Błażej Bałasz iD, Wiesław Szada-Borzyszkowski iD

Materials · 04.09.2025 · 18 (17) · 4150

DOI: 10.3390/ma18174150 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 04.09.2025. Verfasst von Monika Szada-Borzyszkowska und 3 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, Śniadeckich 2, 75-620 Koszalin, Poland. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study was to analyze the effect of finishing methods on the surface quality of Ti-6Al-4V titanium alloy additively manufactured by selective laser melting. It was observed that among the finishing methods, water jet treatment did not produce significant changes, while the abrasive water jet proved effective in removing defects and smoothing the surface, especially at a pressure of 30 MPa. However, the risk of abrasive particle entrapment in the material was observed. Promising results were also obtained using the water–ice jet, which combines effective material removal with surface smoothing. The selection of the finishing method should be tailored to the application requirements. Further research will focus on optimization and the combination of techniques to improve the functional properties of titanium components.

Schlagwörter

Stichwörter der Autor:innen

Ti-based alloysabrasive water jetadditive manufacturingwater jetwater–ice jet

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering and Energy, Koszalin University of Technology, Śniadeckich 2, 75-620 Koszalin, Poland.
  • Branch of the KUT in Szczecinek, Koszalin University of Technology, 78-400 Szczecinek, Poland.

ORCID-Profile: Monika Szada-Borzyszkowska, Dorota Laskowska, Błażej Bałasz, Wiesław Szada-Borzyszkowski

Zitieren

APA

Szada-Borzyszkowska, M., Laskowska, D., Bałasz, B., & Szada-Borzyszkowski, W. (2025). Hydrojet Surface Treatment of Ti-6Al-4V Titanium Produced by Additive Manufacturing. Materials, 18(17), 4150. https://doi.org/10.3390/ma18174150

Vancouver

Szada-Borzyszkowska M, Laskowska D, Bałasz B, Szada-Borzyszkowski W. Hydrojet Surface Treatment of Ti-6Al-4V Titanium Produced by Additive Manufacturing. Materials. 2025;18(17):4150. doi:10.3390/ma18174150

BibTeX
@article{SzadaBorzyszkowska2025,
  author = {Szada-Borzyszkowska, Monika and Laskowska, Dorota and Bałasz, Błażej and Szada-Borzyszkowski, Wiesław},
  title = {Hydrojet Surface Treatment of Ti-6Al-4V Titanium Produced by Additive Manufacturing},
  journal = {Materials},
  year = {2025},
  volume = {18},
  number = {17},
  pages = {4150},
  doi = {10.3390/ma18174150}
}
Kostenlos starten →