Guidewire passage through metal stent mesh using a novel sphincterotome during the stent-in-stent technique
Endoscopy · 01.03.2026 · 58 (S 01 S 01) · E440-E442
DOI: 10.1055/a-2830-5068 ↗Kurz gefasst
Fachartikel in der Zeitschrift Endoscopy, erschienen am 01.03.2026. Verfasst von Shinsuke Akiyama und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Gastroenterology, Kobe City Medical Center General Hospital, Kobe, Japan. Der Volltext ist frei in PubMed Central verfügbar.
Abstract (Originalsprache)
The stent-in-stent technique using metal stents is widely employed for the management of perihilar biliary strictures caused by cholangiocarcinoma [ 1 ]. However, guidewire passage through the mesh of a previously placed metal stent remains technically challenging when the target bile duct axis is not aligned with the stent lumen [ 2 ]. Recently, a novel sphincterotome (ENGETSU; Kaneka Corp., Osaka, Japan) designed for endoscopic sphincterotomy has become available. Owing to its wide range of motion and rotational capability ([ Fig. 1 ], [ Fig. 2 ]), this device has been reported to be effective for endoscopic sphincterotomy in patients with surgically altered anatomy [ 3 ] [ 4 ] and for selective biliary cannulation, including transpapillary gallbladder drainage [ 5 ]. Herein, we report a case in which this sphincterotome facilitated guidewire passage through the stent mesh during the stent-in-stent technique ([ Video 1 ]). Fig. 1 The novel sphincterotome (ENGETSU; Kaneka Corp., Osaka, Japan) has two cutting functions. a Normal configuration. b Pull configuration. c Push configuration. Fig. 2 The novel sphincterotome also demonstrates superior rotational performance, enabling stepwise 180-degree rotation in both clockwise and counterclockwise directions. Download Video Use of a novel sphincterotome to facilitate guidewire passage through the metal stent mesh during the stent-in-stent technique.Video 1 A 75-year-old man receiving chemotherapy for gallbladder cancer presented with jaundice due to occlusion of a previously placed inner stent. The stent was removed, and endoscopic retrograde cholangiopancreatography (ERCP) revealed multiple strictures involving the common hepatic duct, the origin of the anterior segmental branch, and the left hepatic duct ([ Fig. 3 ] a ). Initially, an uncovered self-expandable metallic stent (8 mm × 8 cm) was deployed into the B2 segment ([ Fig. 3 ] b ). Subsequent attempts to advance a 0.025-inch guidewire through the stent mesh using a standard injection catheter were unsuccessful because of misalignment with the axis of the anterior segmental branch. The catheter was therefore exchanged for the ENGETSU sphincterotome. Under fluoroscopic guidance, counterclockwise rotation combined with a push maneuver enabled successful guidewire passage through the stent mesh into the anterior segmental branch ([ Fig. 4 ]). Additional stent placement using the stent-in-stent technique was successfully performed, resulting in the resolution of jaundice ([ Fig. 5 ]). Fig. 3 Fluoroscopic images during biliary metal stent placement using the stent-in-stent technique. a ERCP revealed an irregular stricture extending from the common hepatic duct to the origin of the anterior segmental branch (yellow arrowheads). An abnormality was also noted in the posterior segmental branch, originating from the left hepatic duct (blue arrowhead). b Initially, an uncovered self-expandable metallic stent (8 mm × 8 cm) was deployed into the B2 segment. Fig. 4 Fluoroscopic images demonstrating guidewire passage through the mesh of a previously placed metal stent during the stent-in-stent technique. Yellow arrows indicate the catheter tips of the devices used: a standard injection catheter (MTW Endoskopie Manufaktur, Wesel, Germany) and a novel sphincterotome (ENGETSU; Kaneka Corp., Osaka, Japan). a An initial attempt to advance a 0.025-inch guidewire through the metal stent mesh using the standard injection catheter failed because of misalignment with the axis of the anterior segmental branch. b The standard catheter was exchanged for the ENGETSU sphincterotome, which was initially oriented toward the left hepatic duct. c Under fluoroscopic guidance, counterclockwise rotation was applied to the ENGETSU. d A push maneuver applied to the ENGETSU blade corrected the alignment with the anterior segmental branch. e The guidewire was subsequently advanced successfully through the stent mesh. Fig. 5 A final fluoroscopic view demonstrating successful bilateral metal stent placement using the stent-in-stent technique. This case highlights the usefulness of a novel sphincterotome for guidewire manipulation through the metal stent mesh in technically challenging stent-in-stent procedures. Endoscopy_UCTN_Code_TTT_1AR_2AZ Publication History Article published online: 25 March 2026 © 2026. The Author(s). This is an open access article published by Thieme under the terms of the Creative Commons Attribution License, permitting unrestricted use, distribution, and reproduction so long as the original work is properly cited. (https://creativecommons.org/licenses/by/4.0/). Georg Thieme Verlag KG Oswald-Hesse-Straße 50, 70469 Stuttgart, Germany
Autor:innen und Institutionen
- Department of Gastroenterology, Kobe City Medical Center General Hospital, Kobe, Japan.
ORCID-Profile: Shinsuke Akiyama
Zitieren
APA
Akiyama, S., Kobayashi, T., Tanke, G., Wada, M., & Inokuma, T. (2026). Guidewire passage through metal stent mesh using a novel sphincterotome during the stent-in-stent technique. Endoscopy, 58(S 01 S 01), E440-E442. https://doi.org/10.1055/a-2830-5068
Vancouver
Akiyama S, Kobayashi T, Tanke G, Wada M, Inokuma T. Guidewire passage through metal stent mesh using a novel sphincterotome during the stent-in-stent technique. Endoscopy. 2026;58(S 01 S 01):E440-E442. doi:10.1055/a-2830-5068
BibTeX
@article{Akiyama2026,
author = {Akiyama, Shinsuke and Kobayashi, Takuya and Tanke, Gensho and Wada, Masaya and Inokuma, Tetsuro},
title = {Guidewire passage through metal stent mesh using a novel sphincterotome during the stent-in-stent technique},
journal = {Endoscopy},
year = {2026},
volume = {58},
number = {S 01 S 01},
pages = {E440--E442},
doi = {10.1055/a-2830-5068}
}
EUVIMED