EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Polylactic Acid-Based In-house Three-Dimensional-Printed Intraoperative Surgical Model is a Time- and Cost-efficient Approach for Mandibular Reconstruction

Kristaninta Bangun, Vika Tania, Windy Cendrick, Jessica Halim, Parintosa Atmodiwirjo, Mohamad R. Ramadan, Prasetyanugraheni Kreshanti

Journal of Reconstructive Microsurgery Open · 01.07.2023 · 08 (02) · e120-e124

DOI: 10.1055/a-2162-0460 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reconstructive Microsurgery Open, erschienen am 01.07.2023. Verfasst von Kristaninta Bangun und 6 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The advanced development of computer-assisted design/manufacturing (CAD/CAM) technology aids in the process of producing patient-specific template for intraoperative dissection and fixation guide. To date, CAD/CAM technology has been greatly used in reconstructive mandibular cases to enhance accuracy, reduce operation time, and minimize possible complications. However, this technology was believed to be cost- and time-inefficient, limiting widespread use in several institutions.

Methods

This study displayed five case series incorporating in-house three-dimensional (3D)-printed models. 3D imaging was retrieved from computed tomography scan Digital Imaging and Communications in Medicine files, which was processed to STL (Stereo-lithography) format to recreate a symmetrical postoperative design. The rendered 3D file was then printed with the in-house printer using polylactic acid (PLA) material. A sterilized 3D-printed model was used as intraoperative guidance for plate bending and positioning. The process, time, and cost of each 3D model production were documented.

Results

A total of 100% success rate was observed in processing 3D-printed model in all cases, with no fail in printing. The printing time on average took 7 hours, 39 minutes (ranging from 5 hours 59 minutes up to 9 hours 43 minutes) and cost spent on average was approximately $1.83 on each print (ranging from $1.69 up to $2.10). The in-house 3D printer costs approximately $750, which is compact and can be easily purchased online.

Conclusion

CAD/CAM technology is a cost- and time-efficient approach, in addition to its renowned benefits in increasing surgical accuracy, reducing operation time, improving postoperative look, and minimizing complications. We suggest the implementation of in-house printed PLA-based 3D surgical guide for mandibular reconstructions.

Zitieren

APA

Bangun, K., Tania, V., Cendrick, W., Halim, J., Atmodiwirjo, P., Ramadan, M. R., & Kreshanti, P. (2023). Polylactic Acid-Based In-house Three-Dimensional-Printed Intraoperative Surgical Model is a Time- and Cost-efficient Approach for Mandibular Reconstruction. Journal of Reconstructive Microsurgery Open, 08(02), e120-e124. https://doi.org/10.1055/a-2162-0460

Vancouver

Bangun K, Tania V, Cendrick W, Halim J, Atmodiwirjo P, Ramadan MR, et al. Polylactic Acid-Based In-house Three-Dimensional-Printed Intraoperative Surgical Model is a Time- and Cost-efficient Approach for Mandibular Reconstruction. Journal of Reconstructive Microsurgery Open. 2023;08(02):e120-e124. doi:10.1055/a-2162-0460

BibTeX
@article{Bangun2023,
  author = {Bangun, Kristaninta and Tania, Vika and Cendrick, Windy and Halim, Jessica and Atmodiwirjo, Parintosa and Ramadan, Mohamad R. and Kreshanti, Prasetyanugraheni},
  title = {Polylactic Acid-Based In-house Three-Dimensional-Printed Intraoperative Surgical Model is a Time- and Cost-efficient Approach for Mandibular Reconstruction},
  journal = {Journal of Reconstructive Microsurgery Open},
  year = {2023},
  volume = {08},
  number = {02},
  pages = {e120--e124},
  doi = {10.1055/a-2162-0460}
}
Kostenlos starten →