EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wear and corrosion behavior of selected up-quenched and step-quenched CuZnSn shape memory alloys

Justus Uchenna Anaele, Kenneth Kanayo Alaneme, Joseph Ajibade Omotoyinbo

Manufacturing Review · 2023 · 10 · 16

DOI: 10.1051/mfreview/2023015 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Manufacturing Review, online erschienen am 10.11.2023. Verfasst von Justus Uchenna Anaele und 2 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of thermal treatment on the wear and corrosion behavior of three categories of Cu-Zn-Sn-Fe SMAs designated A, B, and C is studied. Wear properties were investigated using a tribometer whilst corrosion in 0.3 M H 2 SO 4 and 3.5%NaCl media was studied using the potentiodynamic polarization method. The microstructure of the alloys mainly consists of FCC Cu-rich phase and Cu 5 Zn 8 phase. The up-quenched A alloys show the highest hardness and lowest wear rate values of 72.1 HRB and 0.143 mm 3 /N/m respectively. Average COF was higher for the samples subjected to direct-quenching (0.35–0.12) than the up-quenched (0.16–0.12) and step-quenched (0.2–0.08) samples. Wear occurred by mixed mode mechanisms of abrasion and adhesion evident by grooves and wear particles on the surface. In 0.3 M H 2 SO 4 medium, step-quenched alloys had corrosion rates in the range of 0.1022 to 1.1705 mm/yr, which is lower than the range of 0.1466 to 0.2855 mm/yr, and 0.1730 to 0.6027 mm/yr obtained for direct quenched and up-quenched samples respectively. In 3.5% NaCl solution, step-quenched alloys had the lowest corrosion rates 0.0251 mm/yr relative to samples subjected to up-quenching and direct quenching treatment. Generally, step-quenching treatment effectively improved the corrosion resistance of alloys in both media.

Zitieren

APA

Anaele, J. U., Alaneme, K. K., & Omotoyinbo, J. A. (2023). Wear and corrosion behavior of selected up-quenched and step-quenched CuZnSn shape memory alloys. Manufacturing Review, 10, 16. https://doi.org/10.1051/mfreview/2023015

Vancouver

Anaele JU, Alaneme KK, Omotoyinbo JA. Wear and corrosion behavior of selected up-quenched and step-quenched CuZnSn shape memory alloys. Manufacturing Review. 2023;10:16. doi:10.1051/mfreview/2023015

BibTeX
@article{Anaele2023,
  author = {Anaele, Justus Uchenna and Alaneme, Kenneth Kanayo and Omotoyinbo, Joseph Ajibade},
  title = {Wear and corrosion behavior of selected up-quenched and step-quenched CuZnSn shape memory alloys},
  journal = {Manufacturing Review},
  year = {2023},
  volume = {10},
  pages = {16},
  doi = {10.1051/mfreview/2023015}
}
Kostenlos starten →