Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys
Coatings · 20.09.2025 · 15 (9) · 1103
DOI: 10.3390/coatings15091103 ↗Kurz gefasst
Fachartikel in der Zeitschrift Coatings, online erschienen am 20.09.2025. Verfasst von Luis Olmos und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Secretariat of Science, Humanities, Technology e Innovation SECIHTI, scientific research coordination (CIC) of the UMSNH.
Abstract (Originalsprache)
Cu–Al–Ni shape memory alloys (SMAs) are attractive for structural and functional applications due to their cost-effectiveness and shape memory behavior. This study systematically investigated the effect of beryllium (Be) addition on the phase stability, microstructure, transformation temperatures, mechanical hardness, corrosion resistance, and wear behavior of Cu–Al–Ni alloys. Alloys with Be contents ranging from 0 to 1.5 wt.% were fabricated via arc melting and subjected to thermal treatment. Characterization techniques included dilatometry, X-ray diffraction (XRD), microhardness testing, potentiodynamic polarization, and pin-on-flat wear testing. The results showed that Be additions ≤ 0.4 wt.% stabilized the martensitic β′ phase, while higher concentrations favored the formation of austenitic β phase with a BCC structure. Hardness increased with Be content, especially in austenitic samples. Corrosion tests revealed that while the 0.2 wt.% Be alloy exhibited the most positive corrosion potential (Ecorr), it also had a higher corrosion rate. Overall, corrosion resistance declined with Be concentrations ≥ 0.6 wt.%. Wear tests demonstrated improved resistance in martensitic alloys, attributed to pseudoplastic deformation. These findings highlight the dual role of Be in modifying phase stability and functional properties, offering useful guidance for designing Cu-based SMAs with tailored performance.
Förderung
- Secretariat of Science, Humanities, Technology e Innovation SECIHTI
- scientific research coordination (CIC) of the UMSNH
Zitieren
APA
Olmos, L., Jimenez, O., Alanis, I., Alvarado-Hernández, F., Chavez, J., Olmos, B. A., Flores-Jiménez, M., Bravo-Bárcenas, D. I., & Flores, M. (2025). Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys. Coatings, 15(9), 1103. https://doi.org/10.3390/coatings15091103
Vancouver
Olmos L, Jimenez O, Alanis I, Alvarado-Hernández F, Chavez J, Olmos BA, et al. Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys. Coatings. 2025;15(9):1103. doi:10.3390/coatings15091103
BibTeX
@article{Olmos2025,
author = {Olmos, Luis and Jimenez, Omar and Alanis, Ivon and Alvarado-Hernández, Francisco and Chavez, Jorge and Olmos, Bertha Alejandra and Flores-Jiménez, Max and Bravo-Bárcenas, David Israel and Flores, Martín},
title = {Influence of Beryllium Addition on the Microstructure, Corrosion, and Wear Properties of Cu-Al-Ni Shape Memory Alloys},
journal = {Coatings},
year = {2025},
volume = {15},
number = {9},
pages = {1103},
doi = {10.3390/coatings15091103}
}
EUVIMED