EUVIMEDEUVIMED entdecken
Crossref

Influence of asymmetric flow rate ratio of dual ladle shrouds on flow, heat transfer, and inclusion transport in a billet continuous casting tundish with seven-strand

Wei Yang, Mingyu Zhu, Yanbin Yin, Jiongming Zhang

Metallurgical Research & Technology · 2026 · 123 (4) · 444

DOI: 10.1051/metal/2026076 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 10.07.2026. Verfasst von Wei Yang und 3 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To investigate the metallurgical effects of inlet flow rate distribution between two ladle shrouds in a seven-strand tundish, this study adopts combined physical and numerical methods to systematically analyze the flow field, residence time distribution, temperature field, inclusion removal and slag eye behavior under different inlet flow ratios. The results show that as the inlet flow ratio r increases from 0.6 to 1.0, the asymmetry of the internal flow field gradually weakens and the consistency of outlet flow improves, while the overall metallurgical performance does not change monotonically. The flow uniformity and directional transport capacity achieve a good balance when r ranges from 0.8 to 0.9. A higher flow ratio also improves temperature uniformity, reducing the maximum temperature difference at outlets from 0.7 K to 0.5 K. Inclusion removal efficiency is mainly determined by particle size, and the inlet flow ratio exerts a more obvious influence on fine inclusions. Furthermore, the slag eye area varies non-monotonically with r and reaches the minimum value at r = 0.8. A comparison of different casting speeds further reveals that a casting speed of 2.65 m/min is more conducive to extending fluid residence time and enhancing the flotation removal of medium and large inclusions.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Yang, W., Zhu, M., Yin, Y., & Zhang, J. (2026). Influence of asymmetric flow rate ratio of dual ladle shrouds on flow, heat transfer, and inclusion transport in a billet continuous casting tundish with seven-strand. Metallurgical Research & Technology, 123(4), 444. https://doi.org/10.1051/metal/2026076

Vancouver

Yang W, Zhu M, Yin Y, Zhang J. Influence of asymmetric flow rate ratio of dual ladle shrouds on flow, heat transfer, and inclusion transport in a billet continuous casting tundish with seven-strand. Metallurgical Research & Technology. 2026;123(4):444. doi:10.1051/metal/2026076

BibTeX
@article{Yang2026,
  author = {Yang, Wei and Zhu, Mingyu and Yin, Yanbin and Zhang, Jiongming},
  title = {Influence of asymmetric flow rate ratio of dual ladle shrouds on flow, heat transfer, and inclusion transport in a billet continuous casting tundish with seven-strand},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {4},
  pages = {444},
  doi = {10.1051/metal/2026076}
}
Kostenlos starten →