Research on flow field optimization and industrial application of a seven-strand billet tundish with dual nozzles
Metallurgical Research & Technology · 2026 · 123 (4) · 436
DOI: 10.1051/metal/2026064 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 17.06.2026. Verfasst von Zhenyu Liu und 5 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben. Gefördert von: State Key Laboratory of Advanced Metallurgy, the National Natural Science Foundation of China.
Abstract (Originalsprache)
To improve the uniformity and purity of molten steel, a multi-physical model was used to study the influence of flow control devices on molten steel flow, heat transfer and inclusion removal in a seven-strand dual-nozzle tundish. The results show that the simulated molten steel flow and residence time distribution (RTD) curve are basically consistent with the physical simulation experiment results. After adopting the U-shaped baffle and the optimized turbulence inhibitor (TI), the average residence time reaches 248.0 s, the dead zone volume is reduced by 36.63%, the response time and residence time of the middle strand are increased by 24.0 s and 152.0 s respectively, and the standard deviation of the average residence time is reduced from 23.25 of the prototype model to 15.47 at a casting speed of 3.0 m/min. Meanwhile, the maximum temperature drop is reduced from 38.7 K to 23.7 K, and the molten steel temperature difference between each strand is reduced from 4.5 K to 1.1 K, a decrease of 75%. The removal rate of inclusions with diameter of 100 μm is about 95%, and the consistency between each strand is obviously enhanced.
Förderung
- State Key Laboratory of Advanced Metallurgy
- the National Natural Science Foundation of China
Zitieren
APA
Liu, Z., Feng, M., Yin, Y., Zhang, J., Liu, Q., & Gao, F. (2026). Research on flow field optimization and industrial application of a seven-strand billet tundish with dual nozzles. Metallurgical Research & Technology, 123(4), 436. https://doi.org/10.1051/metal/2026064
Vancouver
Liu Z, Feng M, Yin Y, Zhang J, Liu Q, Gao F. Research on flow field optimization and industrial application of a seven-strand billet tundish with dual nozzles. Metallurgical Research & Technology. 2026;123(4):436. doi:10.1051/metal/2026064
BibTeX
@article{Liu2026,
author = {Liu, Zhenyu and Feng, Mingyang and Yin, Yanbin and Zhang, Jiongming and Liu, Qiang and Gao, Fubin},
title = {Research on flow field optimization and industrial application of a seven-strand billet tundish with dual nozzles},
journal = {Metallurgical Research & Technology},
year = {2026},
volume = {123},
number = {4},
pages = {436},
doi = {10.1051/metal/2026064}
}
EUVIMED