EUVIMEDEUVIMED entdecken
Crossref

Design and development of feedback control system for modern manufacturing processes

Pankaj Kumar Singh, Manoj K. Satyarthi, Manish Singh, Ravi Prakash Singh

Metallurgical Research & Technology · 2026 · 123 (4) · 422

DOI: 10.1051/metal/2026048 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 05.06.2026. Verfasst von Pankaj Kumar Singh und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing trends in manufacturing industries have led to the development of advanced materials with high strength, low weight, and enhanced mechanical and chemical properties. However, Machining of these newly developed materials has become prime issue for manufacturers. Furthermore, The increasing demand of miniaturized products has intensified the need for manufacturing at micro and nano levels. Industries such as automobiles, electronics, aerospace, and nuclear reactors require components with higher accuracy and precision. To address these requirments, a closed-loop feedback control system was designed and developed for applications in non-conventional machining processes such as ultrasonic machining (USM), electro discharge machining (EDM), electro chemical machining (ECM), with minor modifications. The system feasibility was validated using an electro-deposition process. The developed system uses voltage as an input signal to estimate the gap between the electrode and workpiece through a derived mathematical relationship. The deviation from the predefined gap is converted into control pulses to drive a stepper motor for precise tool positioning. Experimental results show smooth motor operation at 313 Hz with a minimum threshold voltage of 2.7 V. Voltage errors of 0.012 V and 0.004 V were obtained for 85 and 150 samples, respectively, indicating improved accuracy with increased sampling, although the response time increased to approximately 2 s. The system achieved positional control within 0–5 mm using a lead screw (pitch 1 mm) with a basic length unit of 0.005 mm. The total fabrication cost was approximately ₹ 5800, demonstrating the cost-effectiveness of the proposed system. Overall, the developed low-cost feedback control system exhibits reliable performance and can be effectively adapted for precision control in modern non-conventional machining processes.

Zitieren

APA

Singh, P. K., Satyarthi, M. K., Singh, M., & Singh, R. P. (2026). Design and development of feedback control system for modern manufacturing processes. Metallurgical Research & Technology, 123(4), 422. https://doi.org/10.1051/metal/2026048

Vancouver

Singh PK, Satyarthi MK, Singh M, Singh RP. Design and development of feedback control system for modern manufacturing processes. Metallurgical Research & Technology. 2026;123(4):422. doi:10.1051/metal/2026048

BibTeX
@article{Singh2026,
  author = {Singh, Pankaj Kumar and Satyarthi, Manoj K. and Singh, Manish and Singh, Ravi Prakash},
  title = {Design and development of feedback control system for modern manufacturing processes},
  journal = {Metallurgical Research & Technology},
  year = {2026},
  volume = {123},
  number = {4},
  pages = {422},
  doi = {10.1051/metal/2026048}
}
Kostenlos starten →