Interfacial microstructure and mechanical properties of stainless steel/carbon steel composite plates: effects of hot roll-bonding parameters
Metallurgical Research & Technology · 2026 · 123 (4) · 413
DOI: 10.1051/metal/2026039 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 05.06.2026. Verfasst von Xin Jin und 5 weiteren Autor:innen. Die Arbeit nennt 20 Literaturangaben. Gefördert von: Science Research Project of Hebei Education Department, Doctoral Research Startup Fund Project of Tangshan University.
Abstract (Originalsprache)
As modern industrial progresses, the requirements for the quality of composite plates are becoming increasingly higher. The effects of hot roll-bonding parameters on the interfacial microstructure, elemental diffusion behavior and mechanical properties of stainless steel/carbon steel composite plates are systematically investigated in this paper. OM, SEM and EDS were used to characterize interfacial evolution and element distribution, while mechanical tests measured interfacial shear strength and impact toughness. The results showed that with increasing rolling temperature, the interface evolved from mechanical interlocking to a blurred diffusion zone, yet excessive temperature caused grain coarsening and microdefects. Interfacial shear strength and impact toughness first rose and then fell with elevated temperature and reduction ratio, while both properties decreased continuously with the increase in rolling speed and surface roughness. Moderate plastic deformation and thermal activation achieved optimal elemental interdiffusion, which yielded the highest interfacial shear strength and impact toughness with stable metallurgical bonding at 1100 °C, 0.5 m/s, 50% reduction ratio and Ra 6.5 μm. The synergistic regulation mechanism of surface expansion, normalized interface pressure and diffusion kinetics is clarified, and the optimal matching relationship among rolling temperature, reduction ratio and rolling speed is revealed. This study clarifies the regulatory laws of process parameters on interfacial performance, providing theoretical support for industrial production.
Förderung
- Science Research Project of Hebei Education Department
- Doctoral Research Startup Fund Project of Tangshan University
Zitieren
APA
Jin, X., Li, P., Liu, C., Qi, L., Hou, B., & Kang, K. (2026). Interfacial microstructure and mechanical properties of stainless steel/carbon steel composite plates: effects of hot roll-bonding parameters. Metallurgical Research & Technology, 123(4), 413. https://doi.org/10.1051/metal/2026039
Vancouver
Jin X, Li P, Liu C, Qi L, Hou B, Kang K. Interfacial microstructure and mechanical properties of stainless steel/carbon steel composite plates: effects of hot roll-bonding parameters. Metallurgical Research & Technology. 2026;123(4):413. doi:10.1051/metal/2026039
BibTeX
@article{Jin2026,
author = {Jin, Xin and Li, Ping and Liu, Chengrong and Qi, Lugang and Hou, Baohai and Kang, Kesong},
title = {Interfacial microstructure and mechanical properties of stainless steel/carbon steel composite plates: effects of hot roll-bonding parameters},
journal = {Metallurgical Research & Technology},
year = {2026},
volume = {123},
number = {4},
pages = {413},
doi = {10.1051/metal/2026039}
}
EUVIMED