EUVIMEDEUVIMED entdecken
Crossref

Performance of a HSLA steel produced via EAF and Arvedi ESP ™ process route for the service in gaseous hydrogen

Roberto Venturini, Lorenzo Zanaboni, Noris Battocletti, Marco Bartoletti, Adriano Capparelli, Chiara Zitelli

Matériaux & Techniques · 2026 · 114 (4) · 401

DOI: 10.1051/mattech/2026013 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Matériaux & Techniques, online erschienen am 22.05.2026. Verfasst von Roberto Venturini und 5 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Gefördert von: Invitalia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The transition toward a low-carbon energy system requires safe and efficient infrastructure for hydrogen distribution. One of the main challenges is selecting pipeline materials capable of resisting hydrogen embrittlement and sour service conditions. This study evaluates the performance of a high-strength low-alloy (HSLA) steel, grade X46M (7.11 mm thickness), for potential application in hydrogen distribution pipelines and environments containing H 2 S. The material was produced via Electric Arc Furnace (EAF) and thin slab continuous casting with direct rolling (Arvedi ESP™ process), then formed into high-frequency welded (HFW) pipes and subjected to seam annealing. A comprehensive testing program, including chemical and microstructural characterization, tensile and impact tests, and specific evaluations for hydrogen embrittlement and sulfide stress cracking, was implemented in accordance with EIGA guidelines and API 5L PSL2 and ASME B31.12 standards. Hydrogen-related performances were assessed through fracture toughness tests (K IH ) in 100% hydrogen at 80 bar for 1000 h and Slow Strain Rate (SSR) tests under 100% hydrogen. Sour service resistance was verified by Hydrogen Induced Cracking (HIC) and Four-Point Bent Beam (FPBB) tests in NACE Solution A. The results confirmed that the steel under investigation exhibits a homogeneous ferrite–pearlite microstructure, hardness below 250 HV, and mechanical properties meeting API 5L PSL2 requirements. K IH values exceeded the ASME B31.12 threshold, while SSR tests showed only moderate ductility reduction without brittle fracture. No evidence of HIC or sulfide stress cracking was observed. These findings demonstrate that steel grades produced via the non-conventional EAF + Arvedi ESP™ route can be considered suitable for hydrogen distribution and sour service applications, supporting their potential use in future hydrogen pipeline infrastructure

Förderung

  • Invitalia

Zitieren

APA

Venturini, R., Zanaboni, L., Battocletti, N., Bartoletti, M., Capparelli, A., & Zitelli, C. (2026). Performance of a HSLA steel produced via EAF and Arvedi ESP ™ process route for the service in gaseous hydrogen. Matériaux & Techniques, 114(4), 401. https://doi.org/10.1051/mattech/2026013

Vancouver

Venturini R, Zanaboni L, Battocletti N, Bartoletti M, Capparelli A, Zitelli C. Performance of a HSLA steel produced via EAF and Arvedi ESP ™ process route for the service in gaseous hydrogen. Matériaux & Techniques. 2026;114(4):401. doi:10.1051/mattech/2026013

BibTeX
@article{Venturini2026,
  author = {Venturini, Roberto and Zanaboni, Lorenzo and Battocletti, Noris and Bartoletti, Marco and Capparelli, Adriano and Zitelli, Chiara},
  title = {Performance of a HSLA steel produced via EAF and Arvedi ESP ™ process route for the service in gaseous hydrogen},
  journal = {Matériaux & Techniques},
  year = {2026},
  volume = {114},
  number = {4},
  pages = {401},
  doi = {10.1051/mattech/2026013}
}
Kostenlos starten →