EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hydrogen uptake of 100Cr6 bearing steel in gaseous pressurized hydrogen and resulting tensile strength

Maximilian Baur, Iyas Khader, Dominik Kürten, Lutz Reißig, Frank Schweizer, Andreas Kailer, Martin Dienwiebel

Journal of Iron and Steel Research International · 2026-07 · 33 (7)

DOI: 10.1007/s42243-026-01823-2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Iron and Steel Research International, online erschienen am 21.05.2026. Verfasst von Maximilian Baur und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, Fraunhofer-Institut für Werkstoffmechanik IWM.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Samples of martensitic-hardened bearing steel 100Cr6 (AISI 52100) were exposed to hydrogen atmospheres at different gas pressures. The resulting hydrogen contents were measured, and a pressure-dependent hydrogen charging curve was established. Tensile tests on cylindrical specimens charged at various hydrogen pressures showed a pronounced reduction in strength at hydrogen contents as low as 0.75 × 10 –6 . Fractographic analysis revealed predominantly intergranular fracture with crack propagation along carbide-featured grain boundaries, indicating hydrogen enrichment at microstructural traps. Specimens, in which diffusible hydrogen was allowed to outgas prior to testing, largely recovered their initial strength, demonstrating that the observed embrittlement is mainly governed by diffusible hydrogen and is, to a significant extent, reversible. These findings provide insight into the pressure-dependent influence of hydrogen on the strength and reliability of bearing components operating in hydrogen environments.

Förderung

  • Deutsche Forschungsgemeinschaft
  • Fraunhofer-Institut für Werkstoffmechanik IWM

Zitieren

APA

Baur, M., Khader, I., Kürten, D., Reißig, L., Schweizer, F., Kailer, A., & Dienwiebel, M. (2026). Hydrogen uptake of 100Cr6 bearing steel in gaseous pressurized hydrogen and resulting tensile strength. Journal of Iron and Steel Research International, 33(7). https://doi.org/10.1007/s42243-026-01823-2

Vancouver

Baur M, Khader I, Kürten D, Reißig L, Schweizer F, Kailer A, et al. Hydrogen uptake of 100Cr6 bearing steel in gaseous pressurized hydrogen and resulting tensile strength. Journal of Iron and Steel Research International. 2026;33(7). doi:10.1007/s42243-026-01823-2

BibTeX
@article{Baur2026,
  author = {Baur, Maximilian and Khader, Iyas and Kürten, Dominik and Reißig, Lutz and Schweizer, Frank and Kailer, Andreas and Dienwiebel, Martin},
  title = {Hydrogen uptake of 100Cr6 bearing steel in gaseous pressurized hydrogen and resulting tensile strength},
  journal = {Journal of Iron and Steel Research International},
  year = {2026},
  volume = {33},
  number = {7},
  doi = {10.1007/s42243-026-01823-2}
}
Kostenlos starten →