Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A
Matériaux & Techniques · 2026 · 114 (3) · 304
DOI: 10.1051/mattech/2026005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Matériaux & Techniques, online erschienen am 24.03.2026. Verfasst von Hanen Boubakri und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Gefördert von: Ministry of Higher Education and Scientific Research of Tunisia, Federated Research Project.
Abstract (Originalsprache)
This work investigates the thermomechanical and shape memory behavior of TPU 90A in both raw filament form and after 3D printing by fused deposition modeling (FDM). The study systematically explores how key printing parameters such as extrusion temperature, infill density, and infill direction affect material performance. A major contribution of this research is the development of a UMAT subroutine in Abaqus, enabling accurate simulation of TPU 90A’s thermomechanical and shape memory responses under varied loads and temperature conditions. Validation with experimental data demonstrates a strong shape memory effect, with shape fixity ratio (Rf) and recovery ratio (Rr) exceeding 98%. The numerical model achieves excellent agreement with experiments, as the simulated Young’s modulus (53.97 MPa) closely matches the measured value (55.38 MPa). Optimal mechanical properties were obtained using an extrusion temperature of 230 °C, 45° infill orientation, and 100% infill density, effectively balancing strength and efficiency. Practical feasibility was illustrated through the fabrication of a personalized finger orthosis. Stress analysis revealed peak values of 17.76 MPa, confirming adequate rigidity for stabilization in medical applications.
Förderung
- Ministry of Higher Education and Scientific Research of Tunisia
- Federated Research Project
Zitieren
APA
Boubakri, H., Moussa, N. B., Yahyaoui, H., & Habibi, M. (2026). Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A. Matériaux & Techniques, 114(3), 304. https://doi.org/10.1051/mattech/2026005
Vancouver
Boubakri H, Moussa NB, Yahyaoui H, Habibi M. Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A. Matériaux & Techniques. 2026;114(3):304. doi:10.1051/mattech/2026005
BibTeX
@article{Boubakri2026,
author = {Boubakri, Hanen and Moussa, Naoufel Ben and Yahyaoui, Houda and Habibi, Mohamed},
title = {Effect of 3D printing parameters on the thermomechanical behavior of TPU 90A},
journal = {Matériaux & Techniques},
year = {2026},
volume = {114},
number = {3},
pages = {304},
doi = {10.1051/mattech/2026005}
}
EUVIMED