EUVIMEDEUVIMED entdecken
Crossref

Multi-objective optimization of 3D printing parameters to fabricate TPU for tribological applications

Nirmal Garg, Paras Kumar

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 2026-06 · 240 (3) · 3281-3292

DOI: 10.1177/09544089241279168 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 17.09.2024. Verfasst von Nirmal Garg und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 63 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, polymers frequently replace metals in several applications where comparable properties are desired due to the convenience of processing them as per the requirement. The present work intends to fabricate a thermoplastic polyurethane suitable for journal bearing application using fused deposition modelling (FDM) additive manufacturing method. The cylindrical samples were prepared for experiments using central composite design to examine the effect of FDM machine parameters (such as layer thickness, infill density, and printing speed) on response such as specific wear rate (SWR), coefficient of friction (COF) and hardness. Layer thickness was noticed to be the most significant parameter for the selected responses with a percentage contribution of ∼34% to 72%. Further, as observed from interaction plots the COF and SWR are lowest, and hardness is highest at highest infill density and lowest printing speed. To obtain an optimized set of FDM machine parameters for minimum SWR, COF and maximum hardness, genetic algorithm based multi-objective optimization is performed. The optimized values are SWR of 4.97 × 10 −5 mm 3 /N-m, COF of 0.37 and hardness value of 37.

Zitieren

APA

Garg, N., & Kumar, P. (2026). Multi-objective optimization of 3D printing parameters to fabricate TPU for tribological applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 240(3), 3281-3292. https://doi.org/10.1177/09544089241279168

Vancouver

Garg N, Kumar P. Multi-objective optimization of 3D printing parameters to fabricate TPU for tribological applications. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026;240(3):3281-3292. doi:10.1177/09544089241279168

BibTeX
@article{Garg2026,
  author = {Garg, Nirmal and Kumar, Paras},
  title = {Multi-objective optimization of 3D printing parameters to fabricate TPU for tribological applications},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  volume = {240},
  number = {3},
  pages = {3281--3292},
  doi = {10.1177/09544089241279168}
}
Kostenlos starten →