EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A combined EBSD/nanoindentation study of dislocation density gradients near grain boundaries in a ferritic steel

Layal Chamma, Jean-Marc Pipard, Artem Arlazarov, Thiebaud Richeton, Jean-Sébastien Lecomte, Stéphane Berbenni

Matériaux & Techniques · 2022 · 110 (2) · 203

DOI: 10.1051/mattech/2022005 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Matériaux & Techniques, online erschienen am 26.04.2022. Verfasst von Layal Chamma und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The authors thank ArcelorMittal R&D and ANRT (French National Agency for Technical Research) for financial support..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Microstructural internal lengths play an important role on the local and macroscopic mechanical behaviors of steels. In this study, the dislocation density gradients near grain boundaries in a ferritic steel are investigated using SEM/EBSD together with instrumented nanoindentation for undeformed and pre-deformed aluminum-killed steels (Al-k) at 3% and 18% tensile plastic strains. The effect of the distance to grain boundaries on Geometrically Necessary Dislocations (GND) densities is first determined by analyzing orientation gradients from 2D-EBSD maps. Then, nanohardness measurements are performed in the vicinity of grain boundaries. Data analyses show a clear correlation between the spatial gradients of GND density and the ones of nanohardness. Using a mechanistic model, the total dislocation densities are estimated from the measured nanohardness values. From both GND and total dislocation density profiles, the value of an internal length, denoted λ, is estimated from the analysis of dislocation density gradients near grain boundaries. At the end, the capabilities of 2D-EBSD and nanoindentation methods to assess this value are discussed.

Förderung

  • The authors thank ArcelorMittal R&D and ANRT (French National Agency for Technical Research) for financial support.

Zitieren

APA

Chamma, L., Pipard, J., Arlazarov, A., Richeton, T., Lecomte, J., & Berbenni, S. (2022). A combined EBSD/nanoindentation study of dislocation density gradients near grain boundaries in a ferritic steel. Matériaux & Techniques, 110(2), 203. https://doi.org/10.1051/mattech/2022005

Vancouver

Chamma L, Pipard J, Arlazarov A, Richeton T, Lecomte J, Berbenni S. A combined EBSD/nanoindentation study of dislocation density gradients near grain boundaries in a ferritic steel. Matériaux & Techniques. 2022;110(2):203. doi:10.1051/mattech/2022005

BibTeX
@article{Chamma2022,
  author = {Chamma, Layal and Pipard, Jean-Marc and Arlazarov, Artem and Richeton, Thiebaud and Lecomte, Jean-Sébastien and Berbenni, Stéphane},
  title = {A combined EBSD/nanoindentation study of dislocation density gradients near grain boundaries in a ferritic steel},
  journal = {Matériaux & Techniques},
  year = {2022},
  volume = {110},
  number = {2},
  pages = {203},
  doi = {10.1051/mattech/2022005}
}
Kostenlos starten →