EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Nanoindentation Approach to Investigating Dislocation Density in Additive-Manufactured SS316L-Graded Lattice Structures

Kamal Sleem, Gabriele Grima, Marcello Cabibbo

Journal of Manufacturing and Materials Processing · 13.02.2025 · 9 (2) · 59

DOI: 10.3390/jmmp9020059 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 13.02.2025. Verfasst von Kamal Sleem und 2 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union-NextGenerationEU (National Sustainable Mobility Center, Italian Ministry of University and Research Decree, National Recovery and Resilience Plan (NRRP).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The dislocation density in additive-manufactured components significantly influences the local mechanical behavior of crystalline metals. Nanoindentation, renowned for its sensitivity to local mechanical responses and hardness, facilitates the assessment of local dislocation density. This study aimed to analyze the evolution of local dislocation densities in bulk, graded lattice structures (GLSs), and reduced-size GLSs of LPBF SS316L via nanoindentation. Components were fabricated using laser powder bed fusion with 316L stainless steel. The microstructural analysis revealed that the distribution of mechanical deformation across the bodies of the parts was higher in the reduced-size GLS compared to that obtained for the GLS. The simulation of plastic deformation allowed for recognizing that this difference is attributed to the different thermal stresses resulting from the higher rate of thermal excursions to which the scaffold structure was subjected whenever there was a reduction in the reciprocal distance of the struts. Mechanical deformation, identified as the primary factor contributing to dislocation density in additive manufacturing, was significant in both the GLS and reduced-size GLS, for which the dislocation density was incremented by one order of magnitude compared to the bulk material.

Förderung

  • European Union-NextGenerationEU (National Sustainable Mobility Center
  • Italian Ministry of University and Research Decree
  • National Recovery and Resilience Plan (NRRP)
  • Excellence Departments, MIUR-Italy

Zitieren

APA

Sleem, K., Grima, G., & Cabibbo, M. (2025). A Nanoindentation Approach to Investigating Dislocation Density in Additive-Manufactured SS316L-Graded Lattice Structures. Journal of Manufacturing and Materials Processing, 9(2), 59. https://doi.org/10.3390/jmmp9020059

Vancouver

Sleem K, Grima G, Cabibbo M. A Nanoindentation Approach to Investigating Dislocation Density in Additive-Manufactured SS316L-Graded Lattice Structures. Journal of Manufacturing and Materials Processing. 2025;9(2):59. doi:10.3390/jmmp9020059

BibTeX
@article{Sleem2025,
  author = {Sleem, Kamal and Grima, Gabriele and Cabibbo, Marcello},
  title = {A Nanoindentation Approach to Investigating Dislocation Density in Additive-Manufactured SS316L-Graded Lattice Structures},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2025},
  volume = {9},
  number = {2},
  pages = {59},
  doi = {10.3390/jmmp9020059}
}
Kostenlos starten →