EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Design and FEM analysis of high‐power density C‐core permanent magnet transverse flux generator with reduced PM volume

Ali Muhammad, Faisal Khan, Basharat Ullah, Ahmad H. Milyani, Abdullah A. Azhari

IET Renewable Power Generation · 2023-03 · 17 (4) · 885-893

DOI: 10.1049/rpg2.12642 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IET Renewable Power Generation, online erschienen am 23.11.2022. Verfasst von Ali Muhammad und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Transverse flux machines are made up of armature coils wound in a circular direction and surrounded by armature cores. This configuration enables machines to be designed for multi‐pole structures while maintaining a simple coil geometry regardless of the pole count. As a result, these machines generate more torque and power density than most of the machines with windings wound around teeth and inserted into slots. However, transverse flux machines continue to face manufacturing difficulties because a large number of relatively small permanent magnets are required. Thus, a permanent magnet transverse flux generator (PMTFG) is designed with half the magnets on the rotor in comparison with a regular design while generating 18% better power density at the same size and excitation conditions. After proper parameter selection, the electromagnetic performance of the design is examined, and the viability of the design is verified using a three‐dimensional finite‐element model (FEM). Further analyses were carried out to examine the effect of stator core material and air gap length on the performance of PMTFG. Furthermore, a prototype of the proposed topology is built, which validates the performance obtained through FEM.

Zitieren

APA

Muhammad, A., Khan, F., Ullah, B., Milyani, A. H., & Azhari, A. A. (2023). Design and FEM analysis of high‐power density C‐core permanent magnet transverse flux generator with reduced PM volume. IET Renewable Power Generation, 17(4), 885-893. https://doi.org/10.1049/rpg2.12642

Vancouver

Muhammad A, Khan F, Ullah B, Milyani AH, Azhari AA. Design and FEM analysis of high‐power density C‐core permanent magnet transverse flux generator with reduced PM volume. IET Renewable Power Generation. 2023;17(4):885-893. doi:10.1049/rpg2.12642

BibTeX
@article{Muhammad2023,
  author = {Muhammad, Ali and Khan, Faisal and Ullah, Basharat and Milyani, Ahmad H. and Azhari, Abdullah A.},
  title = {Design and FEM analysis of high‐power density C‐core permanent magnet transverse flux generator with reduced PM volume},
  journal = {IET Renewable Power Generation},
  year = {2023},
  volume = {17},
  number = {4},
  pages = {885--893},
  doi = {10.1049/rpg2.12642}
}
Kostenlos starten →