Design and Multi‐Objective Optimisation of Dual‐Stator Permanent Magnet Wind Power Generator
IET Electric Power Applications · 2026-01 · 20 (1)
DOI: 10.1049/elp2.70209 ↗Kurz gefasst
Fachartikel in der Zeitschrift IET Electric Power Applications, online erschienen am 06.07.2026. Verfasst von Hao Liu und 1 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Henan Province, Key Scientific Research Project of Colleges and Universities in Henan Province.
Abstract (Originalsprache)
To address the low torque density and large volume of traditional generators and meet the high power density, large single‐unit capacity and high reliability of wind power, this paper proposes a dual‐stator permanent magnet wind power generator (DSPMWPG) to improve torque density. The torque density is related to the machine power distribution, main dimensions and slot‐pole combinations. Firstly, according to the machine working principles and topology, a 10 MW DSPMWPG is designed. Then, the optimisation function is established with the objectives of improving torque, reducing cogging torque and torque ripple. Meanwhile, the main parameters are sensitivity analysed. Based on the sensitivity stratification, this paper proposes combining the genetic algorithm with the response surface methodology to optimise the key parameters of the DSPMWPG. On this basis, the performance parameters of the optimised DSPMWPG are calculated and analysed using numerical methods, and the results are compared with those of the initial machine. From the results, the output power and average torque of the optimised DSPMWPG are 8.89%, 6.66% higher than those of the initial DSPMWPG, respectively. However, the cogging torque and torque ripple of the former are 68.05%, 78.83% lower than those of the latter, respectively. Finally, the temperature field of the optimised DSPMWPG is calculated and analysed using the computational fluid dynamics (CFD) method, and the results are compared with those obtained from the finite element method (FEM) calculation. The results validate the feasibility and effectiveness of the analysis method.
Förderung
- Natural Science Foundation of Henan Province
- Key Scientific Research Project of Colleges and Universities in Henan Province
Zitieren
APA
Liu, H., & Liu, Y. (2026). Design and Multi‐Objective Optimisation of Dual‐Stator Permanent Magnet Wind Power Generator. IET Electric Power Applications, 20(1). https://doi.org/10.1049/elp2.70209
Vancouver
Liu H, Liu Y. Design and Multi‐Objective Optimisation of Dual‐Stator Permanent Magnet Wind Power Generator. IET Electric Power Applications. 2026;20(1). doi:10.1049/elp2.70209
BibTeX
@article{Liu2026,
author = {Liu, Hao and Liu, Yiming},
title = {Design and Multi‐Objective Optimisation of Dual‐Stator Permanent Magnet Wind Power Generator},
journal = {IET Electric Power Applications},
year = {2026},
volume = {20},
number = {1},
doi = {10.1049/elp2.70209}
}
EUVIMED