EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

A 0.360‐pJ/Bit 28‐Gb/s/Wire Single‐Ended Simultaneous Bi‐Directional Transceiver With Low‐Power CML‐Hybrid for Memory Interfaces

Jiseok Park, Sanha Park, Yong‐Un Jeong

Electronics Letters · 2026-01 · 62 (1)

DOI: 10.1049/ell2.70677 ↗

At a glance

Journal article in Electronics Letters, published online on 2026-07-28. Written by Jiseok Park and 2 co-authors. 17 references. The full text is freely available (open access, CC BY-NC-ND 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This paper proposes a low‐power CML‐hybrid that minimises additional circuits for single‐ended ultra‐short‐reach (USR) memory interfaces. By employing a PMOS transistor to simultaneously perform data inversion and outbound signal subtraction, the CML‐hybrid eliminates the need for inverted data inputs and is implemented as a single‐ended architecture. The CML‐hybrid structure reduces circuit complexity and power consumption compared with conventional replica‐based hybrids. The prototype transceiver, fabricated using a 28‐nm CMOS process, achieves a hybrid output eye width of 0.85‐unit interval (UI) and an eye height of 50.5 mV at a data rate of 28 Gb/s/wire, while consuming only 0.36 pJ/bit.

Cite

APA

Park, J., Park, S., & Jeong, Y. (2026). A 0.360‐pJ/Bit 28‐Gb/s/Wire Single‐Ended Simultaneous Bi‐Directional Transceiver With Low‐Power CML‐Hybrid for Memory Interfaces. Electronics Letters, 62(1). https://doi.org/10.1049/ell2.70677

Vancouver

Park J, Park S, Jeong Y. A 0.360‐pJ/Bit 28‐Gb/s/Wire Single‐Ended Simultaneous Bi‐Directional Transceiver With Low‐Power CML‐Hybrid for Memory Interfaces. Electronics Letters. 2026;62(1). doi:10.1049/ell2.70677

BibTeX
@article{Park2026,
  author = {Park, Jiseok and Park, Sanha and Jeong, Yong‐Un},
  title = {A 0.360‐pJ/Bit 28‐Gb/s/Wire Single‐Ended Simultaneous Bi‐Directional Transceiver With Low‐Power CML‐Hybrid for Memory Interfaces},
  journal = {Electronics Letters},
  year = {2026},
  volume = {62},
  number = {1},
  doi = {10.1049/ell2.70677}
}
Start for free →