EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Deep reinforcement learning enhanced PID control for hydraulic servo systems in injection molding machines

Xiaoxi Hao, Zengmiao Xin, Weizhuo Huang, Sicheng Wan, Guangfan Qiu, Tianlei Wang, Zhu Wang

Scientific Reports · 2025-07-02 · 15 (1)

DOI: 10.1038/s41598-025-05904-2 ↗

At a glance

Journal article in Scientific Reports, published online on 2025-07-02. Written by Xiaoxi Hao and 6 co-authors. Institution: School of Mechanical and Automation Engineering, Wuyi University, Jiangmen, 529020, Guangdong, China. Cited 23 times so far (Crossref); 41 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Special Project for Research and Development in Key areas of Guangdong Province,China, Jiangmen Municipal Supporting Science and Technology Development Funds Project, Jiangmen Science and Technology Plan Project.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

To address the issue of insufficient position control accuracy in the servo-hydraulic system of injection molding machines under nonlinear characteristics and external disturbances, this paper proposes a novel adaptive PID control strategy enhanced by the Deep Deterministic Policy Gradient (DDPG) algorithm. An auxiliary servo valve is introduced to improve flow capacity and enhance the system's dynamic response performance. Meanwhile, the DDPG algorithm is utilized to adjust the PID parameters in real time based on tracking errors and system state feedback, thereby improving the controller's adaptability to time-varying operating conditions. Compared with traditional control methods, the proposed strategy demonstrates superior tracking accuracy, faster convergence, and stronger robustness. In particular, this work innovatively integrates the DDPG algorithm with an auxiliary servo valve structure for PID parameter optimization and dynamic performance enhancement, offering new ideas and technical pathways for adaptive control of complex hydraulic systems.

Subjects

Author keywords

Adaptive controlDDPGIntelligent controlPosition controlReinforcement learningServo hydraulic system

Authors and institutions

  • School of Mechanical and Automation Engineering, Wuyi University, Jiangmen, 529020, Guangdong, China.
  • School of Mechanical and Automation Engineering, Wuyi University, Jiangmen, 529020, Guangdong, China. lewisxin09@gmail.com.
  • School of Electronic and Information Engineering, Wuyi University, Jiangmen, 529020, Guangdong, China.
  • Jiangmen Mengde Electric Co., 529040, Jiangmen, Guangdong, China.
  • School of Electronic and Information Engineering, Wuyi University, Jiangmen, 529020, Guangdong, China. tianlei.wang@aliyun.com.
  • School of Mechanical and Automation Engineering, Wuyi University, Jiangmen, 529020, Guangdong, China. 2112304125@wyu.edu.cn.

Funding

  • Special Project for Research and Development in Key areas of Guangdong Province,China
  • Jiangmen Municipal Supporting Science and Technology Development Funds Project
  • Jiangmen Science and Technology Plan Project
  • Special Project for Research and Development in Key areas of Guangdong Province,China广东省重点领域研究与开发专项
  • water quality online monitoring instruments and core accessories localization research and development and industrialization

Cite

APA

Hao, X., Xin, Z., Huang, W., Wan, S., Qiu, G., Wang, T., & Wang, Z. (2025). Deep reinforcement learning enhanced PID control for hydraulic servo systems in injection molding machines. Scientific Reports, 15(1). https://doi.org/10.1038/s41598-025-05904-2

Vancouver

Hao X, Xin Z, Huang W, Wan S, Qiu G, Wang T, et al. Deep reinforcement learning enhanced PID control for hydraulic servo systems in injection molding machines. Scientific Reports. 2025;15(1). doi:10.1038/s41598-025-05904-2

BibTeX
@article{Hao2025,
  author = {Hao, Xiaoxi and Xin, Zengmiao and Huang, Weizhuo and Wan, Sicheng and Qiu, Guangfan and Wang, Tianlei and Wang, Zhu},
  title = {Deep reinforcement learning enhanced PID control for hydraulic servo systems in injection molding machines},
  journal = {Scientific Reports},
  year = {2025},
  volume = {15},
  number = {1},
  doi = {10.1038/s41598-025-05904-2}
}
Start for free →