EUVIMEDSkopri EUVIMED
Open access · CC BY-NC-ND 4.0

Phenyl-Reinforced Uniform Chains: Triblock Copolyether Plasticizer Refining the Strength and Conductivity of PEO Electrolyte

Hongxuan Zhu, Chenke Zhao iD, Duzheng Sun, Shimu Yu, Guodong Liu, Hongxin Zhang, Junpeng Zhao iD

Polymer Science & Technology · 2026-07-28 · 2 (7) · 495-504

DOI: 10.1021/polymscitech.5c00147 ↗

At a glance

Journal article in Polymer Science & Technology, published online on 2026-03-14. Written by Hongxuan Zhu and 6 co-authors. Institution: School of Chemical Engineering, Qinghai University, Qinghai 810016, China. 79 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: National Natural Science Foundation of China, Qinghai Provincial Department of Science and Technology.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Triblock copolymers consisting of poly(ethylene oxide) (PEO) and poly(styrene oxide) (PSO), i.e., PSO-b-PEO-b-PSO (EGES), are synthesized by a one-pot organocatalytic approach and used as plasticizers to refine PEO-based solid polymer electrolytes. The high similarity of C–C–O-type polyether backbones of PEO and PSO moderated microphase separation of EGES and ensured its good compatibility with the PEO matrix. These effects, coupled with the weak coordinative interaction between Li+ ions and oxygen atoms in the PSO segments, enhance Li+ conductivity and lower ion transport activation energy, thus alleviating the “dead zone” issue of conventional PEO–polystyrene block copolymers. With optimal plasticizer composition and blend ratio, a nearly 100-fold increase in ionic conductivity is achieved at 30 °C (3.60 × 10–5 S cm–1). At 50 °C, the conductivity remains substantially higher than that of neat PEO, and an expanded electrochemical stability window of 4.42 V and a higher Li+ transference number of 0.35 are also allowed. XPS characterization confirms the formation of a stable organic/inorganic bilayer solid electrolyte interphase on the Li metal surface, enabling excellent interfacial stability. Puncture resistance tests demonstrate improved plasticity of the electrolytes, which is considered effective in preventing lithium dendrite penetration. This study shows that the rationally designable and easily accessible copolyether plasticizers may open up a wide avenue for advancing all-solid-state lithium metal batteries.

Subjects

Author keywords

Li metal batteryblock copolymerplasticizerring-opening polymerizationsolid polymer electrolyte

Authors and institutions

  • School of Chemical Engineering, Qinghai University, Qinghai 810016, China.
  • Faculty of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.

ORCID profiles: Chenke Zhao, Junpeng Zhao

Funding

  • National Natural Science Foundation of China
  • Qinghai Provincial Department of Science and Technology

Cite

APA

Zhu, H., Zhao, C., Sun, D., Yu, S., Liu, G., Zhang, H., & Zhao, J. (2026). Phenyl-Reinforced Uniform Chains: Triblock Copolyether Plasticizer Refining the Strength and Conductivity of PEO Electrolyte. Polymer Science & Technology, 2(7), 495-504. https://doi.org/10.1021/polymscitech.5c00147

Vancouver

Zhu H, Zhao C, Sun D, Yu S, Liu G, Zhang H, et al. Phenyl-Reinforced Uniform Chains: Triblock Copolyether Plasticizer Refining the Strength and Conductivity of PEO Electrolyte. Polymer Science & Technology. 2026;2(7):495-504. doi:10.1021/polymscitech.5c00147

BibTeX
@article{Zhu2026,
  author = {Zhu, Hongxuan and Zhao, Chenke and Sun, Duzheng and Yu, Shimu and Liu, Guodong and Zhang, Hongxin and Zhao, Junpeng},
  title = {Phenyl-Reinforced Uniform Chains: Triblock Copolyether Plasticizer Refining the Strength and Conductivity of PEO Electrolyte},
  journal = {Polymer Science & Technology},
  year = {2026},
  volume = {2},
  number = {7},
  pages = {495--504},
  doi = {10.1021/polymscitech.5c00147}
}
Start for free →