EUVIMEDSkopri EUVIMED
Open access · CC BY-NC-ND 4.0

Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes

Prince S. A. Nopuo, Alberto Rodríguez-Gómez, Miguel A. Rodríguez-Cano, Manuel A. Rodrigo, Justo Lobato

Chem & Bio Engineering · 2026-11-18

DOI: 10.1021/cbe.6c00194 ↗

At a glance

Journal article in Chem & Bio Engineering, published online on 2026-11-18. Written by Prince S. A. Nopuo and 4 co-authors. 44 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Ministerio de Ciencia, Innovaci?n y Universidades, European Social Fund Plus, HORIZON EUROPE Digital, Industry and Space.

AstrattDettalji biblijografiċiCiteRelated studies

Abstract (original language)

Chlor-alkali electrolysis is one of the most energy-intensive industrial processes, and the development of cathode materials that balance high activity with reduced noble metal utilization remains a critical challenge. This work reports the evaluation of low-platinum on carbon cloth (Pt/CC) cathodes in membrane chlor-alkali electrolysis. The Pt loading levels ranged from 0.025 to 0.2 mg Pt cm–2 and were deposited via air-gun spray and electrospray. XRD analysis confirmed fcc Pt crystallites in both air-gun- and electrospray-deposited electrodes with no oxide phases, demonstrating that the deposition technique does not affect the crystallographic structure of the catalyst. Full-cell linear sweep voltammetry and galvanostatic electrolysis experiments revealed a decrease in specific energy consumption for NaOH production with increasing Pt loading. Balancing performance and platinum utilization, a loading of 0.05 mg Pt cm–2 emerged as optimal, which, at 100 mA cm–2, achieved a specific energy consumption of 2.94 and 2.83 kWh kg–1 NaOH at 25 and 50 °C, respectively. At this optimal loading level, the electrode demonstrated high durability over 80 h of operation at 100 mA cm–2 and 50 °C. The technology was further validated in a four-cell stack comprising 25 cm2 electrodes connected in parallel, yielding enhanced performance and operational stability. These results demonstrate that air-gun-spray-deposited Pt/CC cathodes at 0.05 mg Pt cm–2 loading offer a compelling combination of competitive energy efficiency and minimal noble metal utilization, highlighting the potential for an ultralow-Pt-based cathode platform for next-generation energy-efficient chlor-alkali production.

Funding

  • Ministerio de Ciencia, Innovaci?n y Universidades
  • European Social Fund Plus
  • HORIZON EUROPE Digital, Industry and Space

Cite

APA

Nopuo, P. S. A., Rodríguez-Gómez, A., Rodríguez-Cano, M. A., Rodrigo, M. A., & Lobato, J. (2026). Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes. Chem & Bio Engineering. https://doi.org/10.1021/cbe.6c00194

Vancouver

Nopuo PSA, Rodríguez-Gómez A, Rodríguez-Cano MA, Rodrigo MA, Lobato J. Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes. Chem & Bio Engineering. 2026. doi:10.1021/cbe.6c00194

BibTeX
@article{Nopuo2026,
  author = {Nopuo, Prince S. A. and Rodríguez-Gómez, Alberto and Rodríguez-Cano, Miguel A. and Rodrigo, Manuel A. and Lobato, Justo},
  title = {Unlocking New Opportunities for Platinum in Chlor-Alkali Electrolysis with Ultralow-Pt Carbon Cloth Cathodes},
  journal = {Chem & Bio Engineering},
  year = {2026},
  doi = {10.1021/cbe.6c00194}
}
Start for free →