Floating or Sinking Carbon Dioxide Clathrate Hydrate in Brines: Density Determination and Relevance to Seawater Desalination
Chem & Bio Engineering · 2026-11-20
DOI: 10.1021/cbe.6c00191 ↗At a glance
Journal article in Chem & Bio Engineering, published online on 2026-11-20. Written by Toshiyuki Tanaka and 4 co-authors. 63 references. The full text is freely available (open access, CC BY 4.0). Funded by: Japan Society for the Promotion of Science, Cabinet Office, Government of Japan, Mayekawa Houonkai Foundation.
Abstract (original language)
An experimental investigation was carried out to determine whether carbon dioxide clathrate hydrate, formed by reacting brines of various concentrations with carbon dioxide gas, floats or sinks in the remaining unreacted brine. This study aims to advance clathrate hydrate-based seawater desalination and/or salt production. The carbon dioxide clathrate hydrate formed in the reactors is recovered together with the unreacted seawater as slurry and then sent to the solid–liquid separation process. Understanding whether the hydrate floats or sinks is essential for the design and operation of the process. In this study, floating or sinking was determined by visual inspection when the system reached three-phase equilibrium among sodium chloride aqueous solution, carbon dioxide clathrate hydrate, and carbon dioxide gas. The equilibrium sodium chloride mass fraction in the brine ranged from 0.095 to 0.150. At higher mass fraction, the carbon dioxide clathrate hydrate floated in the aqueous solution. The critical mass fraction, defined as the average of the two mass fractions bounding the transition from sinking to floating, increased with pressure and was 0.109 ± 0.011 at approximately 1 MPa and 0.118 ± 0.007 at approximately 2 MPa. The corresponding equilibrium temperatures were approximately 266 and 272 K, respectively. Because sinking and floating correspond to opposite relative density orderings of the clathrate hydrate and the aqueous solution, the density of clathrate hydrate was determined from the density of aqueous solution at the corresponding intermediate condition to be 1092 ± 9 kg/m3 at about 1 MPa and 1105 ± 7 kg/m3 at about 2 MPa, suggesting that the hydrate density increases with increasing pressure. These density data were compared with values reported in previous studies based on physical characterization. Finally, the relevance of these findings to seawater desalination technology was discussed.
Funding
- Japan Society for the Promotion of Science
- Cabinet Office, Government of Japan
- Mayekawa Houonkai Foundation
- University of the Ryukyus
- Okinawa Prefecture
- Institute of Ocean Energy, Saga University
Cite
APA
Tanaka, T., Gibo, A., Shiraishi, S., Ohmura, R., & Yasuda, K. (2026). Floating or Sinking Carbon Dioxide Clathrate Hydrate in Brines: Density Determination and Relevance to Seawater Desalination. Chem & Bio Engineering. https://doi.org/10.1021/cbe.6c00191
Vancouver
Tanaka T, Gibo A, Shiraishi S, Ohmura R, Yasuda K. Floating or Sinking Carbon Dioxide Clathrate Hydrate in Brines: Density Determination and Relevance to Seawater Desalination. Chem & Bio Engineering. 2026. doi:10.1021/cbe.6c00191
BibTeX
@article{Tanaka2026,
author = {Tanaka, Toshiyuki and Gibo, Akari and Shiraishi, Sayaka and Ohmura, Ryo and Yasuda, Keita},
title = {Floating or Sinking Carbon Dioxide Clathrate Hydrate in Brines: Density Determination and Relevance to Seawater Desalination},
journal = {Chem & Bio Engineering},
year = {2026},
doi = {10.1021/cbe.6c00191}
}
EUVIMED