EUVIMEDObjevte EUVIMED
Open access · CC BY-NC-ND 4.0

Co–Ni Synergy Engineered in a Perovskite for Highly Selective Nitrate Electroreduction to Ammonia

Xirui Wang, Qingyu Li, Mengyu Guo, Long Chen, Fenhong Zhao, Kang Liu, Yue Wang, Jiankun Sun iD, Lixue Zhang iD

Chem & Bio Engineering · 2026-02-26 · 3 (2) · 351-360

DOI: 10.1021/cbe.5c00158 ↗

At a glance

Journal article in Chem & Bio Engineering, published online on 2026-01-26. Written by Xirui Wang and 8 co-authors. Institution: College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071, China. Cited 1 times so far (Crossref); 52 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Taishan Scholar Project of Shandong Province, National Natural Science Foundation of China, Qingdao New Energy Shandong Laboratory Open Project.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

Perovskite oxides have emerged as promising electrocatalysts for the nitrate reduction reaction (NO3RR) to ammonia, yet their practical application is often limited by unsatisfactory ammonia selectivity, low yield, and poor suppression of competing reactions. Herein, we develop a multimetallic perovskite electrocatalyst, La0.5Sr0.5Co0.5Ni0.5O3 (LSCNO), via a sol-gel method. Density functional theory (DFT) results show that Ni doping regulates the electronic structure of Co and shifts its d-band center upward. This optimization lowers the energy barrier of the *NO → *NOH rate-determining step and accelerates nitrate-reduction kinetics, further enhancing the intrinsic catalytic activity. As a result, LSCNO delivers a remarkable NO3RR performance, achieving a Faradaic efficiency of 94.96% and an NH3 yield rate of 9475.9 μg h-1 cm-2 at -0.5 V vs RHE, while maintaining excellent stability during 12 consecutive cycles and prolonged operation at a current density οf 150 mA cm-2. When implemented in a flow-cell system, compared to H-type electrolytic cells, the catalyst enables a steady increase in the ammonia yield at lower potential. Furthermore, a Zn-NO3 - battery assembled with an LSCNO cathode delivers a peak power density of 10.19 mW cm-2 and outstanding long-term cycling durability over 10,000 min. These results highlight LSCNO as a highly efficient and stable catalyst for nitrate-to-amine conversion, demonstrating significant potential for practical nitrogen-resource recovery and sustainable energy storage.

Subjects

Author keywords

Co−Ni synergyZn-NO3− batteryammonianitrate reduction reactionperovskite oxides

Authors and institutions

  • College of Chemistry and Chemical Engineering, Qingdao University, Qingdao 266071, China.

ORCID profiles: Jiankun Sun, Lixue Zhang

Funding

  • Taishan Scholar Project of Shandong Province
  • National Natural Science Foundation of China
  • Qingdao New Energy Shandong Laboratory Open Project

Cite

APA

Wang, X., Li, Q., Guo, M., Chen, L., Zhao, F., Liu, K., Wang, Y., Sun, J., & Zhang, L. (2026). Co–Ni Synergy Engineered in a Perovskite for Highly Selective Nitrate Electroreduction to Ammonia. Chem & Bio Engineering, 3(2), 351-360. https://doi.org/10.1021/cbe.5c00158

Vancouver

Wang X, Li Q, Guo M, Chen L, Zhao F, Liu K, et al. Co–Ni Synergy Engineered in a Perovskite for Highly Selective Nitrate Electroreduction to Ammonia. Chem & Bio Engineering. 2026;3(2):351-360. doi:10.1021/cbe.5c00158

BibTeX
@article{Wang2026,
  author = {Wang, Xirui and Li, Qingyu and Guo, Mengyu and Chen, Long and Zhao, Fenhong and Liu, Kang and Wang, Yue and Sun, Jiankun and Zhang, Lixue},
  title = {Co–Ni Synergy Engineered in a Perovskite for Highly Selective Nitrate Electroreduction to Ammonia},
  journal = {Chem & Bio Engineering},
  year = {2026},
  volume = {3},
  number = {2},
  pages = {351--360},
  doi = {10.1021/cbe.5c00158}
}
Start for free →