EUVIMEDOpdag EUVIMED
ÜbersichtsarbeitOpen access · CC BY-NC-ND 4.0

4D Printing of Shape-Morphing Liquid Crystal Elastomers

Tongzhi Zang, Shuang Fu, Junpeng Cheng, Chun Zhang, Xili Lu iD, Jianshe Hu iD, Hesheng Xia iD, Yue Zhao iD

Chem & Bio Engineering · 2024-07-25 · 1 (6) · 488-515

DOI: 10.1021/cbe.4c00027 ↗

At a glance

Übersichtsarbeit in Chem & Bio Engineering, published online on 2024-06-03. Written by Tongzhi Zang and 7 co-authors. Institution: State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China. Cited 39 times so far (Crossref); 175 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Science and Technology Department of Sichuan Province, National Natural Science Foundation of China.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

In nature, biological systems can sense environmental changes and alter their performance parameters in real time to adapt to environmental changes. Inspired by these, scientists have developed a range of novel shape-morphing materials. Shape-morphing materials are a kind of "intelligent" materials that exhibit responses to external stimuli in a predetermined way and then display a preset function. Liquid crystal elastomer (LCE) is a typical representative example of shape-morphing materials. The emergence of 4D printing technology can effectively simplify the preparation process of shape-morphing LCEs, by changing the printing material compositions and printing conditions, enabling precise control and macroscopic design of the shape-morphing modes. At the same time, the layer-by-layer stacking method can also endow the shape-morphing LCEs with complex, hierarchical orientation structures, which gives researchers a great degree of design freedom. 4D printing has greatly expanded the application scope of shape-morphing LCEs as soft intelligent materials. This review systematically reports the recent progress of 3D/4D printing of shape-morphing LCEs, discusses various 4D printing technologies, synthesis methods and actuation modes of 3D/4D printed LCEs, and summarizes the opportunities and challenges of 3D/4D printing technologies in preparing shape-morphing LCEs.

Authors and institutions

  • State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute, Sichuan University, Chengdu 610065, China.
  • Center for Molecular Science and Engineering, College of Science, Northeastern University, Shenyang 110819, China.
  • Département de chimie, Université de Sherbrooke, Sherbrooke, Québec J1K 2R1, Canada.

ORCID profiles: Xili Lu, Jianshe Hu, Hesheng Xia, Yue Zhao

Funding

  • Science and Technology Department of Sichuan Province
  • National Natural Science Foundation of China

Cite

APA

Zang, T., Fu, S., Cheng, J., Zhang, C., Lu, X., Hu, J., Xia, H., & Zhao, Y. (2024). 4D Printing of Shape-Morphing Liquid Crystal Elastomers. Chem & Bio Engineering, 1(6), 488-515. https://doi.org/10.1021/cbe.4c00027

Vancouver

Zang T, Fu S, Cheng J, Zhang C, Lu X, Hu J, et al. 4D Printing of Shape-Morphing Liquid Crystal Elastomers. Chem & Bio Engineering. 2024;1(6):488-515. doi:10.1021/cbe.4c00027

BibTeX
@article{Zang2024,
  author = {Zang, Tongzhi and Fu, Shuang and Cheng, Junpeng and Zhang, Chun and Lu, Xili and Hu, Jianshe and Xia, Hesheng and Zhao, Yue},
  title = {4D Printing of Shape-Morphing Liquid Crystal Elastomers},
  journal = {Chem & Bio Engineering},
  year = {2024},
  volume = {1},
  number = {6},
  pages = {488--515},
  doi = {10.1021/cbe.4c00027}
}
Start for free →