Steel Slag-Based Belite−Ferrite Clinker as a Low-Carbon Component in Portland Cement: Formation, Hydration, and Microstructural Refinement
ACS Sustainable Chemistry & Engineering · 17.08.2026 · 14 (32) · 14377-14392
DOI: 10.1021/acssuschemeng.6c05084 ↗Kurz gefasst
Fachartikel in der Zeitschrift ACS Sustainable Chemistry & Engineering, online erschienen am 04.08.2026. Verfasst von Yulin Shao und 6 weiteren Autor:innen. Die Arbeit nennt 55 Literaturangaben. Gefördert von: Guangxi Key Research and Development Program, Science and Technology Program of Hubei Province, National Natural Science Foundation of China (NSFC).
Abstract (Originalsprache)
Low-carbon cement requires clinker designs with lower CaO demand and more effective utilization of industrial wastes. In this study, a steel slag-based Belite−Ferrite (BF) clinker dominated by dicalcium silicate (C2S) and tetracalcium aluminoferrite (C4AF) was developed and evaluated. The results indicate that the steel slag-based BF clinker highly promoted the formation of active α-C2S, which formed ∼23.2% active α-C2S in the total C2S phase, as well as reduced about 22−38% CO2 emissions compared with ordinary Portland cement (OPC) clinker. As an alternative material for OPC clinker, the produced BF clinker exhibited low early reactivity but presented a continuing hydration and strength growth in 28 d, which enhanced 5−19% compressive strength at 28 d with 10−40% replacement of OPC clinker in OPC-BF cement system. The estimated CO2 emissions of the OPC-BF cement system were 3−16% lower than those of the pure OPC system, indicating that steel slag-based BF clinker is a promising low-carbon component for OPC.
Förderung
- Guangxi Key Research and Development Program
- Science and Technology Program of Hubei Province
- National Natural Science Foundation of China (NSFC)
Zitieren
APA
Shao, Y., Yang, L., He, J., Dong, Y., Li, X., Liu, S., & Wang, F. (2026). Steel Slag-Based Belite−Ferrite Clinker as a Low-Carbon Component in Portland Cement: Formation, Hydration, and Microstructural Refinement. ACS Sustainable Chemistry & Engineering, 14(32), 14377-14392. https://doi.org/10.1021/acssuschemeng.6c05084
Vancouver
Shao Y, Yang L, He J, Dong Y, Li X, Liu S, et al. Steel Slag-Based Belite−Ferrite Clinker as a Low-Carbon Component in Portland Cement: Formation, Hydration, and Microstructural Refinement. ACS Sustainable Chemistry & Engineering. 2026;14(32):14377-14392. doi:10.1021/acssuschemeng.6c05084
BibTeX
@article{Shao2026,
author = {Shao, Yulin and Yang, Lu and He, Jianhui and Dong, Yiran and Li, Xin and Liu, Songhui and Wang, Fazhou},
title = {Steel Slag-Based Belite−Ferrite Clinker as a Low-Carbon Component in Portland Cement: Formation, Hydration, and Microstructural Refinement},
journal = {ACS Sustainable Chemistry & Engineering},
year = {2026},
volume = {14},
number = {32},
pages = {14377--14392},
doi = {10.1021/acssuschemeng.6c05084}
}
EUVIMED