EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The use of granulated copper slag as a raw material component for Portland cement clinker production

Wojciech Wons, Karol Rzepa, Aleksander Glich, Sebastian Komarek

Archives of Civil and Mechanical Engineering · 23.06.2026 · 26 (4)

DOI: 10.1007/s43452-026-01581-8 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Archives of Civil and Mechanical Engineering, online erschienen am 23.06.2026. Verfasst von Wojciech Wons und 3 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Akademia Górniczo-Hutnicza im. Stanislawa Staszica.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The cement industry is energy-intensive, highly-emissive, and fossil fuels-consuming. The natural direction of its development is the partial substitution of raw materials, e.g. with industrial waste. Such potential, alternative raw material is granulated copper slag (GCS), which has a high Fe 2 O 3 content, making it a potential iron-bearing raw material in the production of Portland clinker. Moreover, GCS contains CaO in a decarbonated form. Therefore, its use can contribute to CO 2 emissions reduction in the production of Portland clinker. However, GCS contains components that are not desirable in excessive amounts, such as heavy metals. As literature indicate, they may have a real impact on the clinkerization and the properties of Portland clinker. The main aim of the article is to assess the effect of GCS on the sinterability of Portland clinker, including the influence of heavy metals introduced. The sinterability tests carried out on batches with different GCS contents allowed us to establish that its substitution for the natural iron-bearing raw material does not cause a decrease in the sinterability, but decreases the grindability of Portland clinker. It was shown that Ti and Mn has location priority in the C 4 AF phase, while the remaining metals are evenly distributed in all phases present in Portland clinker. The higher GCS addition, the greater the share of the M3 alite in the clinker, at the expense of the M1 variety. The decrease in CO 2 emissions associated with the introduction of the calcite-free CaO along with the slag is lower than the expected calculated value.

Förderung

  • Akademia Górniczo-Hutnicza im. Stanislawa Staszica

Zitieren

APA

Wons, W., Rzepa, K., Glich, A., & Komarek, S. (2026). The use of granulated copper slag as a raw material component for Portland cement clinker production. Archives of Civil and Mechanical Engineering, 26(4). https://doi.org/10.1007/s43452-026-01581-8

Vancouver

Wons W, Rzepa K, Glich A, Komarek S. The use of granulated copper slag as a raw material component for Portland cement clinker production. Archives of Civil and Mechanical Engineering. 2026;26(4). doi:10.1007/s43452-026-01581-8

BibTeX
@article{Wons2026,
  author = {Wons, Wojciech and Rzepa, Karol and Glich, Aleksander and Komarek, Sebastian},
  title = {The use of granulated copper slag as a raw material component for Portland cement clinker production},
  journal = {Archives of Civil and Mechanical Engineering},
  year = {2026},
  volume = {26},
  number = {4},
  doi = {10.1007/s43452-026-01581-8}
}
Kostenlos starten →