EUVIMEDEUVIMED entdecken
Crossref

A Strain Sensor for Multidirectional Deformation Detection Realized by Rolling Patterned Vertically Aligned Carbon Nanotubes

Yongsheng Yang, Qinqi Ren, Zixuan Zhang, Dexing Liu iD, Yang Zhu, Yufeng Jin, Min Zhang iD

ACS Sensors · 2025

DOI: 10.1021/acssensors.4c03750 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Sensors, 2025. Verfasst von Yongsheng Yang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronic and Computer Engineering, Peking University, Shenzhen 518055, China. Hauptthemen laut MEDLINE: Nanotubes, Carbon. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Gefördert von: National Key Research and Development Program of China, Science and Technology Foundation of Shenzhen City, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Flexible and stretchable sensors have garnered significant attention in the fields of human-computer interaction, motion capture, and health monitoring. Presently, most sensors are limited to capturing motion in a single direction and lack the capability to analyze multidirectional deformations in real world. A single device capable of detecting multidirectional deformations has always been a high expectation and a daunting challenge. In this work, we realize the idea of using a single sensor for multidirectional sensing by adopting a "one-step" rolling process to transfer vertically aligned carbon nanotubes grown on a silicon wafer onto a flexible Ecoflex substrate. The entire preparation process is simple and efficient. Distinct conductive paths form along different directions controlled by the rolling process and the pattern design of carbon nanotubes, thus resulting in a sensitive directional dependence. The sensor exhibits remarkable performance, including a wide operating range (0-120%), high sensitivity (GF = 126.6), short response time (64 ms), and good stability (over 4000 cycles under strain 40%). The sensors are demonstrated for detecting motion signals and monitoring human health, ranging from subtle motion signals to large deformation. These sensor characteristics fulfill the requirements of various practical scenarios and have an immense potential for applications in human-computer interaction interfaces, intelligent robots, and in situ health monitoring.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Nanotubes, CarbonHumansSiliconWearable Electronic Devices

Stichwörter der Autor:innen

carbon nanotubehealth monitoringmultidirectional motion detectionrolling processstretchable strain sensorwearable sensor

Substanzen

Nanotubes, CarbonSilicon

Autor:innen und Institutionen

  • School of Electronic and Computer Engineering, Peking University, Shenzhen 518055, China.
  • School of Science and Engineering, The Chinese University of Hong Kong, Shenzhen 518172, China.

ORCID-Profile: Dexing Liu, Min Zhang

Förderung

  • National Key Research and Development Program of China
  • Science and Technology Foundation of Shenzhen City
  • National Natural Science Foundation of China

Zitieren

APA

Yang, Y., Ren, Q., Zhang, Z., Liu, D., Zhu, Y., Jin, Y., & Zhang, M. (2025). A Strain Sensor for Multidirectional Deformation Detection Realized by Rolling Patterned Vertically Aligned Carbon Nanotubes. ACS Sensors. https://doi.org/10.1021/acssensors.4c03750

Vancouver

Yang Y, Ren Q, Zhang Z, Liu D, Zhu Y, Jin Y, et al. A Strain Sensor for Multidirectional Deformation Detection Realized by Rolling Patterned Vertically Aligned Carbon Nanotubes. ACS Sensors. 2025. doi:10.1021/acssensors.4c03750

BibTeX
@article{Yang2025,
  author = {Yang, Yongsheng and Ren, Qinqi and Zhang, Zixuan and Liu, Dexing and Zhu, Yang and Jin, Yufeng and Zhang, Min},
  title = {A Strain Sensor for Multidirectional Deformation Detection Realized by Rolling Patterned Vertically Aligned Carbon Nanotubes},
  journal = {ACS Sensors},
  year = {2025},
  doi = {10.1021/acssensors.4c03750}
}
Kostenlos starten →