EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Silicon‐Embedded Multifunctional Heterogeneous Integration for Miniaturized Photoplethysmography Detection Devices

Lang Chen iD, Shizun Hu, Zhou Yang, Shitao Shen iD, Pan Zhang, Han Xu iD, Chi Zhang iD, Wei Wang

Advanced Science · 2026

DOI: 10.1002/advs.75416 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Science, 2026. Verfasst von Lang Chen und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuits, Peking University, Beijing, China. Hauptthemen laut MEDLINE: Photoplethysmography, Wearable Electronic Devices, Silicon, Equipment Design. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Natural Science Foundation of China, China Postdoctoral Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The multifunctional integration of chips with high flexibility and scalable manufacturing is crucial for enhancing chip performance, reducing chip size, and simplifying chip design. However, balancing volume, cost, flexibility, and functionality using traditional heterogeneous integration methods is challenging. To overcome this, a silicon‐embedded multifunctional heterogeneous integration method based on top‐down engineering was proposed. As a representative application, a wearable photoplethysmography detection system was demonstrated. The functional modules of this system required for sensing, acquisition, and processing were embedded and reconnected on the same silicon interposer to form a new integrated chip. A thermal‐aware floorplan optimization algorithm was employed to improve the thermal performance of the integrated chip, achieving a 6.5°C reduction in the peak temperature. The chip accurately detected physiological changes across different frequency ranges following physical activity performed at varying intensities by test participants. Compared to traditional integration methods, the proposed method achieved a 46% and 94.7% reduction in power consumption and volume, respectively, and a remarkable 90% increase in functional unit density. This technology promotes rapid, flexible, and low‐cost manufacturing of multifunctional chips toward the development of next‐generation multifunctional, low‐power, miniaturized electronic devices.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PhotoplethysmographyWearable Electronic DevicesSiliconEquipment DesignMiniaturizationHumansAlgorithms

Stichwörter der Autor:innen

heterogeneous integrationmultifunctional devicethermal managementwearable electronics

Substanzen

Silicon

Autor:innen und Institutionen

  • School of Integrated Circuits, Peking University, Beijing, China.
  • National Key Laboratory of Advanced Micro and Nano Manufacture Technology, Beijing, China.
  • Beijing Advanced Innovation Center for Integrated Circuits, Beijing, China.

ORCID-Profile: Lang Chen, Shitao Shen, Han Xu, Chi Zhang

Förderung

  • National Key R&D Program of China
  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • National Key Research and Development Program of China

Zitieren

APA

Chen, L., Hu, S., Yang, Z., Shen, S., Zhang, P., Xu, H., Zhang, C., & Wang, W. (2026). Silicon‐Embedded Multifunctional Heterogeneous Integration for Miniaturized Photoplethysmography Detection Devices. Advanced Science. https://doi.org/10.1002/advs.75416

Vancouver

Chen L, Hu S, Yang Z, Shen S, Zhang P, Xu H, et al. Silicon‐Embedded Multifunctional Heterogeneous Integration for Miniaturized Photoplethysmography Detection Devices. Advanced Science. 2026. doi:10.1002/advs.75416

BibTeX
@article{Chen2026,
  author = {Chen, Lang and Hu, Shizun and Yang, Zhou and Shen, Shitao and Zhang, Pan and Xu, Han and Zhang, Chi and Wang, Wei},
  title = {Silicon‐Embedded Multifunctional Heterogeneous Integration for Miniaturized Photoplethysmography Detection Devices},
  journal = {Advanced Science},
  year = {2026},
  doi = {10.1002/advs.75416}
}
Kostenlos starten →