EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Green Polymer Approach in the Production of Polyurethane Foams Using Chitosan and Citric Acid-Based Polyols

Royal Guliyev iD, Nalan Tekin iD, Mustafa Özgur Bora, Yavuz Emre Yağcı, Nizami Shamiyev

ACS Omega · 11.08.2026 · 11 (31) · 46429-46440

DOI: 10.1021/acsomega.6c03826 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 27.07.2026. Verfasst von Royal Guliyev und 4 weiteren Autor:innen. Beteiligte Einrichtung: Kocaeli University, Faculty of Arts and Science, Department of Chemistry, Kocaeli 41001, Turkey. Die Arbeit nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kocaeli Üniversitesi, Farplas Otomotiv A.S..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polyurethane (PU) foams produced from fossil-based raw materials pose significant environmental and economic challenges. Consequently, sustainable and eco-friendly production methods have become a focal point for researchers in recent years. In this study, the potential use of chitosan as an alternative to fossil-based polyols was investigated in detail. Unlike methods described in the literature, it has been demonstrated that chitosan can be liquefied using citric acid, a low-cost and environmentally friendly component. MALDI-TOF MS and FTIR analyses, when evaluated together, confirmed that chitosan forms new bonds through an esterification reaction. The resulting biopolyol was used for PU foam synthesis by replacing 50% of the fossil-based polyether polyol. The chemical structure, morphology, and mechanical and thermal properties of the produced foams were evaluated using Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), compressive strength, and thermogravimetric analysis (TGA), respectively. The results showed that the maximum decomposition temperature (75% mass loss) of PU foams produced using the chitosan-based biopolyol liquefied with citric acid increased from 390 to 429 °C. These findings demonstrate that the proposed method offers an alternative that is both environmentally friendly and economically beneficial. Furthermore, the fact that this approach to biopolyol production via the liquefaction of chitosan with citric acid is reported for the first time in the literature underscores the innovative nature of the study.

Autor:innen und Institutionen

  • Kocaeli University, Faculty of Arts and Science, Department of Chemistry, Kocaeli 41001, Turkey.
  • Kocaeli University, Faculty of Aeronautics and Astronautics, Aviation Material Research and Development Laboratory, Kocaeli 41380, Turkey.
  • Farplas Otomotiv A.S., Taysad Organize Sanayi Bölgesi (TOSB), Kocaeli 41420, Turkey.
  • Eskişehir Technical University, Faculty of Science, Department of Chemistry, Eskişehir 26140, Turkiye.

ORCID-Profile: Royal Guliyev, Nalan Tekin

Förderung

  • Kocaeli Üniversitesi
  • Farplas Otomotiv A.S.

Zitieren

APA

Guliyev, R., Tekin, N., Bora, M. Ö., Yağcı, Y. E., & Shamiyev, N. (2026). Green Polymer Approach in the Production of Polyurethane Foams Using Chitosan and Citric Acid-Based Polyols. ACS Omega, 11(31), 46429-46440. https://doi.org/10.1021/acsomega.6c03826

Vancouver

Guliyev R, Tekin N, Bora MÖ, Yağcı YE, Shamiyev N. Green Polymer Approach in the Production of Polyurethane Foams Using Chitosan and Citric Acid-Based Polyols. ACS Omega. 2026;11(31):46429-46440. doi:10.1021/acsomega.6c03826

BibTeX
@article{Guliyev2026,
  author = {Guliyev, Royal and Tekin, Nalan and Bora, Mustafa Özgur and Yağcı, Yavuz Emre and Shamiyev, Nizami},
  title = {Green Polymer Approach in the Production of Polyurethane Foams Using Chitosan and Citric Acid-Based Polyols},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {31},
  pages = {46429--46440},
  doi = {10.1021/acsomega.6c03826}
}
Kostenlos starten →