EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Disintegration Behavior in Industrial Conditions of Poly(lactic acid)/Poly(hydroxybutyrate- co -valerate) Blends

Vito Gigante iD, Corrado Sciancalepore iD, Róbert Várdai, Duccio Gallichi-Nottiani, Nóra Hegyesi, Laura Aliotta iD, Daniel Milanese, Béla Pukánszky, Andrea Lazzeri iD

ACS Omega · 18.08.2026 · 11 (32) · 47935-47952

DOI: 10.1021/acsomega.6c03726 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 04.08.2026. Verfasst von Vito Gigante und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil and Industrial Engineering, University of Pisa, Pisa 56126, Italy. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Magyar Tudom?nyos Akad?mia, Universit? degli Studi di Parma, Nemzeti Kutat?si Fejleszt?si ?s Innov?ci?s Hivatal.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study provides a comprehensive evaluation of the disintegration kinetics of poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends by exploring the full compositional spectrum (neat polymers and three intermediate ratios), bridging the gap between degradation behavior, the underlying thermal and mechanical properties, and crystallinity. Extrusion and injection molding techniques were used as processing techniques, and they were instrumental in defining the blends’ final properties and microstructural organization. The resulting crystallinity was identified as a primary factor influencing the disintegration behavior, acting in conjunction with the surface-area-to-volume ratio dictated by sample thickness. The results suggest that PHBV negatively affects the fragmentation of the blends, likely due to its inherently high crystallinity and hydrophobicity, potentially assisted by a constrained amorphous fraction that maintains material stiffness near typical industrial composting temperatures. This behavior was consistently observed in both laboratory-scale and pilot-scale disintegration tests. To gain deeper insights into the disintegration mechanisms, scanning electron microscopy was carried out on the surfaces of the degraded samples, revealing morphological changes and degradation patterns correlated with the structural and compositional differences among the materials. Overall, this study highlights the need to correlate morphology and thermal characteristics with processing history and disintegration conditions to accurately assess the disintegration behavior of biodegradable polymer materials.

Autor:innen und Institutionen

  • Department of Civil and Industrial Engineering, University of Pisa, Pisa 56126, Italy.
  • National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence 50121, Italy.
  • Department of Industrial Systems and Technologies, University of Parma, Parma 43121, Italy.
  • Department of Physical Chemistry and Materials Science, Faculty of Chemical Technology and Biotechnology, Budapest University of Technology and Economics, Budapest 1111, Hungary.
  • Institute of Materials and Environmental Chemistry, Hun-Ren Research Centre for Natural Sciences, Budapest 1117, Hungary.

ORCID-Profile: Vito Gigante, Corrado Sciancalepore, Laura Aliotta, Andrea Lazzeri

Förderung

  • Magyar Tudom?nyos Akad?mia
  • Universit? degli Studi di Parma
  • Nemzeti Kutat?si Fejleszt?si ?s Innov?ci?s Hivatal
  • NextGenerationEU

Zitieren

APA

Gigante, V., Sciancalepore, C., Várdai, R., Gallichi-Nottiani, D., Hegyesi, N., Aliotta, L., Milanese, D., Pukánszky, B., & Lazzeri, A. (2026). Disintegration Behavior in Industrial Conditions of Poly(lactic acid)/Poly(hydroxybutyrate- co -valerate) Blends. ACS Omega, 11(32), 47935-47952. https://doi.org/10.1021/acsomega.6c03726

Vancouver

Gigante V, Sciancalepore C, Várdai R, Gallichi-Nottiani D, Hegyesi N, Aliotta L, et al. Disintegration Behavior in Industrial Conditions of Poly(lactic acid)/Poly(hydroxybutyrate- co -valerate) Blends. ACS Omega. 2026;11(32):47935-47952. doi:10.1021/acsomega.6c03726

BibTeX
@article{Gigante2026,
  author = {Gigante, Vito and Sciancalepore, Corrado and Várdai, Róbert and Gallichi-Nottiani, Duccio and Hegyesi, Nóra and Aliotta, Laura and Milanese, Daniel and Pukánszky, Béla and Lazzeri, Andrea},
  title = {Disintegration Behavior in Industrial Conditions of Poly(lactic acid)/Poly(hydroxybutyrate- co -valerate) Blends},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {32},
  pages = {47935--47952},
  doi = {10.1021/acsomega.6c03726}
}
Kostenlos starten →