EUVIMEDEUVIMED entdecken
Crossref

Blown film extrusion of poly(lactic)acid/poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) blends for improved toughness and processability

Nazan Koca, Clizia Aversa, Massimiliano Barletta

Polymer Engineering & Science · 2023-10 · 63 (10) · 3300-3312

DOI: 10.1002/pen.26445 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymer Engineering & Science, online erschienen am 02.08.2023. Verfasst von Nazan Koca und 2 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 47 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(lactic acid) is one of the most commonly used bioplastics thanks to its mechanical performance and low environmental impact. Strategies to overcome excessive rigidity of PLA are constantly investigated. Poor viscoelastic behavior and brittleness of PLA seriously limit its potential application as a common film material. Herein highly amorphous Poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) (P(3HB)(4HB)) was introduced to improve toughness and reduce brittleness of PLA. Anti‐blocking (silica) and anti‐slipping agent (Ethylene bis‐stearamide (EBS)) were added to improve the processability of the blends, specifically to solve winding issues of the blown film and unfolding of the layflat. In this study three formulations containing PLA and different ratios of P(3HB)(4HB), specifically 10–20–30% were extruded. The mechanical, thermal and surface characterization of the films was performed. The tensile and the tear strength test results show that P(3HB)(4HB) increased the ductility of PLA based films. Increasing amounts of P(3HB)(4HB) provide a toughening effect on PLA/P(3HB)(4HB) blown films without altering transparency of PLA. Moreover, the processing additives proved to be efficient in improving film blowing stability and avoiding tackiness during the winding phase of the film.

Zitieren

APA

Koca, N., Aversa, C., & Barletta, M. (2023). Blown film extrusion of poly(lactic)acid/poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) blends for improved toughness and processability. Polymer Engineering & Science, 63(10), 3300-3312. https://doi.org/10.1002/pen.26445

Vancouver

Koca N, Aversa C, Barletta M. Blown film extrusion of poly(lactic)acid/poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) blends for improved toughness and processability. Polymer Engineering & Science. 2023;63(10):3300-3312. doi:10.1002/pen.26445

BibTeX
@article{Koca2023,
  author = {Koca, Nazan and Aversa, Clizia and Barletta, Massimiliano},
  title = {Blown film extrusion of poly(lactic)acid/poly(3‐hydroxybutyrate‐4‐hydroxybutyrate) blends for improved toughness and processability},
  journal = {Polymer Engineering & Science},
  year = {2023},
  volume = {63},
  number = {10},
  pages = {3300--3312},
  doi = {10.1002/pen.26445}
}
Kostenlos starten →