EUVIMEDOpdag EUVIMED
Open access · CC BY-NC-ND 4.0

Improved Li+ Transport and Interfacial Stability in PEO-LiTFSI Solid Electrolytes via Al2O3 Ceramic Fillers at 20 °C

Mahdieh Hakimi iD, Robert V Kamalov iD, V Vedavyas iD, Juan M Pérez, Mariela G Ortiz

ACS Omega · 2026-08-04 · 11 (30) · 45104-45120

DOI: 10.1021/acsomega.6c03400 ↗

At a glance

Journal article in ACS Omega, published online on 2026-07-17. Written by Mahdieh Hakimi and 4 co-authors. Institution: Iberian Centre for Research in Energy Storage (CIIAE), Av. de la Universidad s/n, 10003 Cáceres, Extremadura, Spain. 78 references. The full text is freely available (open access, CC BY-NC-ND 4.0). Funded by: Cofinanciado al 85% por la Uni??n Europea, Fondo Europeo de Desarrollo Regional, y la Junta de Extremadura, Autoridad de Gesti??n Ministerio de Hacienda.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Incorporation of ceramic nanofillers (Al2O3, SiO2, TiO2) into PEO-based solid electrolytes is investigated to compare their effects on Li+ transport and address the low room-temperature conductivity of PEO by reducing polymer crystallinity and facilitating Li+ migration through the amorphous phase. Among the tested fillers, 5 wt % Al2O3 reduces membrane crystallinity by ≈ 11% and increases ionic conductivity by ≈1.8-fold. Comparative analysis suggests that Al2O3 stands out due to possible interactions with PEO ether oxygens, as supported by structural and spectroscopic analyses. These interactions generate interconnected Li+ transport pathways along polymer–filler interfaces, improving ionic conduction. Structural (XRD, FTIR, Raman) and thermal (TGA/DSC) analyses confirm an amorphous and thermally stable network. Electrochemical studies demonstrate that the Al2O3-containing membrane provides extended oxidation stability up to 5.22 V, with Li+ transference number and diffusion coefficient 2.58 and 8 times higher than those of the filler-free PEO-LiTFSI system, respectively. This membrane displays reduced overpotential and an almost 100% recovery ratio after current-step cycling, emphasizing superior interfacial compatibility. Stable Li plating/stripping for ≈780 h at 50 μA cm–2 further confirms suppression of lithium dendrite growth, achieving a cycling lifetime 5.5 times longer. These findings highlight the role of Al2O3 in promoting efficient low-temperature interfacial Li+ conduction, offering promising insights for the design of solid polymer electrolytes.

Authors and institutions

  • Iberian Centre for Research in Energy Storage (CIIAE), Av. de la Universidad s/n, 10003 Cáceres, Extremadura, Spain.

ORCID profiles: Mahdieh Hakimi, Robert V Kamalov, V Vedavyas

Funding

  • Cofinanciado al 85% por la Uni??n Europea, Fondo Europeo de Desarrollo Regional, y la Junta de Extremadura
  • Autoridad de Gesti??n Ministerio de Hacienda

Cite

APA

Hakimi, M., Kamalov, R. V., Vedavyas, V., Pérez, J. M., & Ortiz, M. G. (2026). Improved Li+ Transport and Interfacial Stability in PEO-LiTFSI Solid Electrolytes via Al2O3 Ceramic Fillers at 20 °C. ACS Omega, 11(30), 45104-45120. https://doi.org/10.1021/acsomega.6c03400

Vancouver

Hakimi M, Kamalov RV, Vedavyas V, Pérez JM, Ortiz MG. Improved Li+ Transport and Interfacial Stability in PEO-LiTFSI Solid Electrolytes via Al2O3 Ceramic Fillers at 20 °C. ACS Omega. 2026;11(30):45104-45120. doi:10.1021/acsomega.6c03400

BibTeX
@article{Hakimi2026,
  author = {Hakimi, Mahdieh and Kamalov, Robert V and Vedavyas, V and Pérez, Juan M and Ortiz, Mariela G},
  title = {Improved Li+ Transport and Interfacial Stability in PEO-LiTFSI Solid Electrolytes via Al2O3 Ceramic Fillers at 20 °C},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {30},
  pages = {45104--45120},
  doi = {10.1021/acsomega.6c03400}
}
Start for free →