EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Biodegradable MOF-Based Composites Using Twin-Screw Extrusion for Sustainable Agrochemical Delivery

Parimal C Bhomick iD, Evdokiya H Ivanovska iD, Lila A M Mahmoud iD, Adrian L Kelly, Valeska P Ting iD, Sanjit Nayak iD

ACS Omega · 30.06.2026 · 11 (25) · 37927-37935

DOI: 10.1021/acsomega.6c03217 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 15.06.2026. Verfasst von Parimal C Bhomick und 5 weiteren Autor:innen. Beteiligte Einrichtung: Bristol Composites Institute, School of Civil, Aerospace and Design Engineering, University of Bristol, Bristol BS8 1TR, U.K. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council, Science and Engineering Research Board, Royal Society of Chemistry.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

, were synthesized through the solvothermal method and postsynthetically loaded with the three herbicides, 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxyacetic acid (MCPA), and glyphosate. The herbicide-loaded MOFs were incorporated into polycaprolactone (PCL) at 10, 20, and 30 wt % using twin-screw extrusion. The membranes were characterized using Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), and thermogravimetric analysis (TGA). Mechanical testing revealed that the incorporation of MOFs enhanced the Young's modulus of the PCL composite films. The Young's modulus of the herbicide-loaded MOF-PCL (herbicide@MOF@PCL) composite films increased with increasing percentage of MOFs, as compared to when herbicides were directly loaded into the PCL to prepare the composite films. Herbicide release studies showed that herbicide@MOF@PCL led to sustained release of herbicides. These findings highlight the preparation of MOF-based composite membranes using twin-screw extrusion as an environmentally sustainable and effective method and their potential application in agrochemical delivery.

Autor:innen und Institutionen

  • Bristol Composites Institute, School of Civil, Aerospace and Design Engineering, University of Bristol, Bristol BS8 1TR, U.K.
  • Research School of Chemistry, Australian National University, Canberra ACT 2601, Australia.
  • School of Archaeological and Forensic Sciences, University of Bradford, Bradford BD7 1DP, U.K.
  • School of Chemistry, University of Bristol, Bristol BS8 1TR, U.K.
  • Polymer IRC, School of Engineering, University of Bradford, Bradford BD7 1DP, U.K.
  • Bristol Composites Institute, School of Electrical, Electronic and Mechanical Engineering, University of Bristol, Bristol BS8 1TR, U.K.

ORCID-Profile: Parimal C Bhomick, Evdokiya H Ivanovska, Lila A M Mahmoud, Valeska P Ting, Sanjit Nayak

Förderung

  • Engineering and Physical Sciences Research Council
  • Science and Engineering Research Board
  • Royal Society of Chemistry

Zitieren

APA

Bhomick, P. C., Ivanovska, E. H., Mahmoud, L. A. M., Kelly, A. L., Ting, V. P., & Nayak, S. (2026). Fabrication of Biodegradable MOF-Based Composites Using Twin-Screw Extrusion for Sustainable Agrochemical Delivery. ACS Omega, 11(25), 37927-37935. https://doi.org/10.1021/acsomega.6c03217

Vancouver

Bhomick PC, Ivanovska EH, Mahmoud LAM, Kelly AL, Ting VP, Nayak S. Fabrication of Biodegradable MOF-Based Composites Using Twin-Screw Extrusion for Sustainable Agrochemical Delivery. ACS Omega. 2026;11(25):37927-37935. doi:10.1021/acsomega.6c03217

BibTeX
@article{Bhomick2026,
  author = {Bhomick, Parimal C and Ivanovska, Evdokiya H and Mahmoud, Lila A M and Kelly, Adrian L and Ting, Valeska P and Nayak, Sanjit},
  title = {Fabrication of Biodegradable MOF-Based Composites Using Twin-Screw Extrusion for Sustainable Agrochemical Delivery},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {25},
  pages = {37927--37935},
  doi = {10.1021/acsomega.6c03217}
}
Kostenlos starten →