Modeling of Residence Time Distributions of Twin-Screw Extrusion Processes Considering Various Screw Types
Pharmaceutics · 18.07.2026 · 18 (7) · 883
DOI: 10.3390/pharmaceutics18070883 ↗Kurz gefasst
Fachartikel in der Zeitschrift Pharmaceutics, online erschienen am 18.07.2026. Verfasst von Vincent Kimmel und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratory of Solids Process Engineering, Department of Biochemical and Chemical Engineering, Technical University Dortmund, Emil-Figge-Str. 68, 4422…. Die Arbeit nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Purpose
Residence time in pharmaceutical hot-melt extrusion is a crucial process parameter affecting the quality attributes of a dosage form such as content uniformity, bioavailability and toxicity. There is a lack of knowledge about the influence of screw element types on the residence time distribution, which will be addressed in this study.
Methods
Different conveying and kneading elements will be characterized concerning their effect on the residence time using a co-rotating twin-screw extruder with a 28 mm screw diameter. Tracer experiments will be performed while concentration time profiles are measured via inline UV-Vis spectroscopy.
Results
The residence time distribution of all screw types is primarily related to the volume flow but independent of pressure. The two-compartment model of Reitz was utilized to describe the experimental data mathematically. Screw-type-specific dimensionless parameters were derived to quantify the axial mixing performance, as well as the effect on residence time.
Conclusions
The influence of different screw elements on the residence time in hot-melt extrusion processes was quantified using a dimensionless mixing volume and a dimensionless axial dispersion coefficient. The results meet the quantitative descriptions from the literature.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratory of Solids Process Engineering, Department of Biochemical and Chemical Engineering, Technical University Dortmund, Emil-Figge-Str. 68, 44227 Dortmund, Germany.
- INVITE GmbH, Drug Delivery Innovation Center, Chempark Building W32, Otto-Bayer-Str. 32, 51061 Cologne, Germany.
- Bayer AG, 51368 Leverkusen, Germany.
ORCID-Profile: Vincent Kimmel, Werner Hoheisel, Judith Winck, Markus Thommes
Zitieren
APA
Kimmel, V., Zöllig, D., Hoheisel, W., Winck, J., & Thommes, M. (2026). Modeling of Residence Time Distributions of Twin-Screw Extrusion Processes Considering Various Screw Types. Pharmaceutics, 18(7), 883. https://doi.org/10.3390/pharmaceutics18070883
Vancouver
Kimmel V, Zöllig D, Hoheisel W, Winck J, Thommes M. Modeling of Residence Time Distributions of Twin-Screw Extrusion Processes Considering Various Screw Types. Pharmaceutics. 2026;18(7):883. doi:10.3390/pharmaceutics18070883
BibTeX
@article{Kimmel2026,
author = {Kimmel, Vincent and Zöllig, Dario and Hoheisel, Werner and Winck, Judith and Thommes, Markus},
title = {Modeling of Residence Time Distributions of Twin-Screw Extrusion Processes Considering Various Screw Types},
journal = {Pharmaceutics},
year = {2026},
volume = {18},
number = {7},
pages = {883},
doi = {10.3390/pharmaceutics18070883}
}
EUVIMED