EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Decoupling Geometry and Surface Chemistry in 3D-Printed ALD-Functionalized Porous Ceramic Channels

Antoine E Jimenez, Diego R Gomes, Carina Hedrich, Manuel Brinker iD, Fortune Minna, Patrick Huber iD, Kaline P Furlan iD

ACS Omega · 14.07.2026 · 11 (27) · 40232-40241

DOI: 10.1021/acsomega.6c02566 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 29.06.2026. Verfasst von Antoine E Jimenez und 6 weiteren Autor:innen. Beteiligte Einrichtung: Karlsruhe Institute of Technology, Institute for Applied Materials, Ceramic Materials and Technology, Haid-und-Neu Straße 7, Karlsruhe 76131, Germany. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High Resolution Image Download MS PowerPoint Slide Capillary-driven transport is traditionally attributed to the static pore geometry and wettability. However, the time-dependent surface energy of metal oxides, amplified by the high surface area of porous media, remains a key yet underexplored aspect. This study introduces a novel manufacturing route capable of decoupling macroscopic geometry from surface chemistry by integrating additive manufacturing combined with colloidal assembly (AMCA) and functionalization by atomic layer deposition (ALD). This approach enables the fabrication of highly porous aluminum(III) oxide (Al 2 O 3 ) and titanium dioxide (TiO 2 ) ceramic channels after thermal burn-out. Within these structures, the structural and chemical properties are tuned and investigated. Spontaneous imbibition experiments at 0, 6, and 24 h after burn-out reveal a transition from a classical Lucas–Washburn rise to a resistance-limited regime dominated by evaporation and viscous drag. Time-resolved contact-angle measurements revealed that both oxides become superhydrophilic after burn-out and undergo subsequent hydrophobic recovery. Despite TiO 2 being intrinsically more hydrophilic, Al 2 O 3 channels consistently exhibited faster imbibition rates and a higher liquid rise. This behavior is attributed to the rapid surface relaxation of Al 2 O 3, which reduces contact-line friction and minimizes pinning at high-energy adsorption sites, thereby enhancing fluid uptake. Macroscopic geometrical variations in printed channels did not affect the imbibition height but scaled linearly with imbibed volume, confirming the successful decoupling of geometric and chemical transport factors. The excellent structural reproducibility of the AMCA-ALD method establishes it as a robust manufacturing platform for programmable capillary transport. This approach provides a general pathway to design porous ceramics with independently engineered geometries and surface chemistries for applications in microfluidics, diagnostics, and catalysis.

Autor:innen und Institutionen

  • Karlsruhe Institute of Technology, Institute for Applied Materials, Ceramic Materials and Technology, Haid-und-Neu Straße 7, Karlsruhe 76131, Germany.
  • Electron Microscopy Unit, Institute of Advanced Ceramics, Hamburg University of Technology, Eißendorfer Straße 42, Hamburg 21073, Germany.
  • Institute for Materials and X-Ray Physics, Hamburg University of Technology, Denickestraße 15, Hamburg 21073, Germany.
  • Covenant University, KM 10 Idiroko Road, Ota 112104, Nigeria.

ORCID-Profile: Manuel Brinker, Patrick Huber, Kaline P Furlan

Förderung

  • Deutsche Forschungsgemeinschaft

Zitieren

APA

Jimenez, A. E., R Gomes, D., Hedrich, C., Brinker, M., Minna, F., Huber, P., & Furlan, K. P. (2026). Decoupling Geometry and Surface Chemistry in 3D-Printed ALD-Functionalized Porous Ceramic Channels. ACS Omega, 11(27), 40232-40241. https://doi.org/10.1021/acsomega.6c02566

Vancouver

Jimenez AE, R Gomes D, Hedrich C, Brinker M, Minna F, Huber P, et al. Decoupling Geometry and Surface Chemistry in 3D-Printed ALD-Functionalized Porous Ceramic Channels. ACS Omega. 2026;11(27):40232-40241. doi:10.1021/acsomega.6c02566

BibTeX
@article{Jimenez2026,
  author = {Jimenez, Antoine E and R Gomes, Diego and Hedrich, Carina and Brinker, Manuel and Minna, Fortune and Huber, Patrick and Furlan, Kaline P},
  title = {Decoupling Geometry and Surface Chemistry in 3D-Printed ALD-Functionalized Porous Ceramic Channels},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {27},
  pages = {40232--40241},
  doi = {10.1021/acsomega.6c02566}
}
Kostenlos starten →