EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Copolymer Considerations on the Displacing Effect for the Effective Functionalization of 3D-Printed Photopolymer Sensors with Carbon Nanotubes

Veronika Sevriugina, Petr Lepcio iD

ACS Omega · 14.04.2026 · 11 (14) · 21805-21815

DOI: 10.1021/acsomega.5c11529 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 02.04.2026. Verfasst von Veronika Sevriugina und 1 weiteren Autor:innen. Beteiligte Einrichtung: Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, Brno 612 00, Czech Republic. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerstvo ?kolstv?, Ml?de?e a Telov?chovy, Vysok? Ucen? Technick? v Brne.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study is part of a research effort motivated by the effective nanofiller functionalization of polymers for 3D printing sensors, enabling the fine-tuning of their functional properties. While the aspects of various conductive fillers, including their morphology, concentration, dispersion, and surface modification, are widely studied, the dispersing medium receives far less attention. Previously, we revealed a significant effect of conjugated electrons on the overall dielectric properties of filled aromatic polymers. This work examines another aspect of the complex interactions in multicomponent nanocomposite resins by investigating homopolymers and copolymers of two nonconjugated acrylic precursors with seemingly similar dielectric properties after curing but different orientational polarizability in the liquid state. Multiwalled carbon nanotubes (MWCNTs) are employed as a model filler. The results linked rheological, dielectric, and photopolymerization properties with performance in a simple capacitance-correlated strain-sensor setup. It revealed nontrivial and unintuitive effects, scaling the functional properties up to an order of magnitude. The best sensors achieved a sensitivity of 57 pF per 1% of strain, linearity of 0.99, and drift below 1.5% after 500 cycles. These were attributed to the adjusted filler dispersion through the displacement effect, which was fueled by the presence of the second monomer acting as a cosolvent. The results guide the path to improved sensor performance and effective nanofiller functionalization while providing critical material considerations for future academic research and industrial development.

Autor:innen und Institutionen

  • Central European Institute of Technology, Brno University of Technology, Purkyňova 656/123, Brno 612 00, Czech Republic.

ORCID-Profile: Petr Lepcio

Förderung

  • Ministerstvo ?kolstv?, Ml?de?e a Telov?chovy
  • Vysok? Ucen? Technick? v Brne

Zitieren

APA

Sevriugina, V., & Lepcio, P. (2026). Copolymer Considerations on the Displacing Effect for the Effective Functionalization of 3D-Printed Photopolymer Sensors with Carbon Nanotubes. ACS Omega, 11(14), 21805-21815. https://doi.org/10.1021/acsomega.5c11529

Vancouver

Sevriugina V, Lepcio P. Copolymer Considerations on the Displacing Effect for the Effective Functionalization of 3D-Printed Photopolymer Sensors with Carbon Nanotubes. ACS Omega. 2026;11(14):21805-21815. doi:10.1021/acsomega.5c11529

BibTeX
@article{Sevriugina2026,
  author = {Sevriugina, Veronika and Lepcio, Petr},
  title = {Copolymer Considerations on the Displacing Effect for the Effective Functionalization of 3D-Printed Photopolymer Sensors with Carbon Nanotubes},
  journal = {ACS Omega},
  year = {2026},
  volume = {11},
  number = {14},
  pages = {21805--21815},
  doi = {10.1021/acsomega.5c11529}
}
Kostenlos starten →