EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Aligned Polyhydroxybutyrate Fibrous Scaffolds via a Touchspinning Apparatus

Md Mazbah Uddin iD, Ummay Mowshome Jahan, Vijay Mohakar, Amit Talukder iD, Yahya Absalan iD, Brianna Blevins, Nataraja S Yadavalli, Vladimir Reukov iD, Sergiy Minko iD, Suraj Sharma iD

ACS Omega · 10.06.2025 · 10 (22) · 22735-22746

DOI: 10.1021/acsomega.4c11296 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 25.05.2025. Verfasst von Md Mazbah Uddin und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Textiles, Merchandising, and Interiors, University of Georgia, 305 Sanford Dr., Athens, Georgia 30602, United States. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 73 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NINDS NIH HHS.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly-(3-hydroxybutyrate) (PHB) fibers ranging from nano- to microscale were successfully fabricated using a touchspinning apparatus. The optimization of key spinning parametersincluding solution concentration (5-11% w/v), rotational speed (1300-2100 rpm), and feed rate (5-20 μL/min)enabled the production of aligned fibrous scaffolds. Morphological analysis via field emission scanning electron microscopy (FE-SEM) revealed fiber diameters in the range of 0.831-1.273 μm, which were influenced by spinning conditions. Thermal stability was confirmed using thermogravimetric analysis (TGA), with an onset degradation temperature of ∼290 °C. Differential scanning calorimetry (DSC) showed a melting peak of ∼172 °C and a crystallinity increase from 37.9% in the pellet to 42.5% in fibers of PHB. The scaffolds were functionalized with collagen to enhance bioactivity, and fibroblast (NIH3T3) viability was assessed through alamarBlue and Live/Dead assays. Metabolic activity increased significantly over 5 days (p < 0.05), particularly in collagen-modified scaffolds, confirming excellent cell adhesion and proliferation. Immunofluorescent microscopy demonstrated cell elongation along the fiber axis, indicating scaffold-guided cellular orientation. The results establish the feasibility of touchspun PHB scaffolds for tissue engineering applications, offering a scalable alternative to the conventional electrospinning process.

Autor:innen und Institutionen

  • Department of Textiles, Merchandising, and Interiors, University of Georgia, 305 Sanford Dr., Athens, Georgia 30602, United States.
  • Department of Textile Engineering, Chemistry, and Science, North Carolina State University, Raleigh, North Carolina 27606, United States.
  • Department of Chemistry, University of Georgia, 302 E Campus Rd suite 1299B, Athens, Georgia 30602, United States.
  • CytoNest, Inc., 425 River Rd, Athens, Georgia 30602, United States.

ORCID-Profile: Md Mazbah Uddin, Amit Talukder, Yahya Absalan, Vladimir Reukov, Sergiy Minko, Suraj Sharma

Förderung

  • NINDS NIH HHS

Zitieren

APA

Uddin, M. M., Jahan, U. M., Mohakar, V., Talukder, A., Absalan, Y., Blevins, B., Yadavalli, N. S., Reukov, V., Minko, S., & Sharma, S. (2025). Fabrication of Aligned Polyhydroxybutyrate Fibrous Scaffolds via a Touchspinning Apparatus. ACS Omega, 10(22), 22735-22746. https://doi.org/10.1021/acsomega.4c11296

Vancouver

Uddin MM, Jahan UM, Mohakar V, Talukder A, Absalan Y, Blevins B, et al. Fabrication of Aligned Polyhydroxybutyrate Fibrous Scaffolds via a Touchspinning Apparatus. ACS Omega. 2025;10(22):22735-22746. doi:10.1021/acsomega.4c11296

BibTeX
@article{Uddin2025,
  author = {Uddin, Md Mazbah and Jahan, Ummay Mowshome and Mohakar, Vijay and Talukder, Amit and Absalan, Yahya and Blevins, Brianna and Yadavalli, Nataraja S and Reukov, Vladimir and Minko, Sergiy and Sharma, Suraj},
  title = {Fabrication of Aligned Polyhydroxybutyrate Fibrous Scaffolds via a Touchspinning Apparatus},
  journal = {ACS Omega},
  year = {2025},
  volume = {10},
  number = {22},
  pages = {22735--22746},
  doi = {10.1021/acsomega.4c11296}
}
Kostenlos starten →