Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning
Journal of Applied Polymer Science · 15.07.2026 · 143 (27)
DOI: 10.1002/app.70822 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Applied Polymer Science, online erschienen am 28.04.2026. Verfasst von Cheng‐Jun Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 43 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Melt electrospinning has attracted interest as an efficient technology with industrial potential. However, challenges such as low efficiency and insufficient fiber refinement arise when processing high‐viscosity melts. This study therefore proposes combining traditional polyethylene (PE) gel spinning with melt electrospinning to manufacture high‐performance PE fibrous mats. First, linear low‐density polyethylene (LLDPE) and ultrahigh molecular weight polyethylene (UHMWPE) were blended into a PE gel. Then, the composite fibrous mats were prepared via melt electrospinning and hot stretching processes. Rheological and Raman analyses revealed that a composite fibrous mat containing 33 wt% LLDPE and 1.0 wt% UHMWPE exhibited optimal polymer compatibility and dispersion, resulting in the formation of a uniform physically entangled network. Hot stretching promotes stress‐induced lamellar rearrangement and molecular‐chain orientation, resulting in enhanced crystallinity, molecular orientation, and mechanical properties. At a draw ratio of 4, the stress of the composite fibrous mat increased from 17 MPa in the unstretched state to 54 MPa. This method overcomes the limitations of processing PE via melt electrospinning and provides a new approach for processing polymers with similar rheological properties.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, C., Yang, S., Feng, L., Wu, X., Tan, J., Li, H., & Yang, W. (2026). Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning. Journal of Applied Polymer Science, 143(27). https://doi.org/10.1002/app.70822
Vancouver
Li C, Yang S, Feng L, Wu X, Tan J, Li H, et al. Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning. Journal of Applied Polymer Science. 2026;143(27). doi:10.1002/app.70822
BibTeX
@article{Li2026,
author = {Li, Cheng‐Jun and Yang, Si‐Yu and Feng, Lin and Wu, Xuesong and Tan, Jing and Li, Haoyi and Yang, Weimin},
title = {Fabrication of Polyethylene Composite Fibrous Mats via Combined Gel Spinning and Melt Electrospinning},
journal = {Journal of Applied Polymer Science},
year = {2026},
volume = {143},
number = {27},
doi = {10.1002/app.70822}
}
EUVIMED