Frontal Polymerization for the Rapid Obtainment of Polymer Composites
ACS Omega · 18.06.2024 · 9 (24) · 25448-25456
DOI: 10.1021/acsomega.4c03017 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift ACS Omega, online erschienen am 04.06.2024. Verfasst von Giulio Malucelli und 1 weiteren Autor:innen. Beteiligte Einrichtung: Politecnico di Torino, Department of Applied Science and Technology, Viale Teresa Michel 5, 15121 Alessandria, Italy. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: European Commission, Ministero dell'Università e della Ricerca, Università degli Studi di Sassari.
Abstract (Originalsprache)
Among the different polymerization techniques, frontal polymerization (FP) has gained high interest from the scientific community because of its peculiar characteristics: in particular, compared to classic polymerization reactions, FP allows for a better exploitation of the heat of polymerization involved, without requiring any external energy input apart from an initial photo or thermal ignition that triggers the reaction. The latter usually propagates in a few tenths of seconds or (at most) minutes through a hot self-sustaining polymerization front, giving rise to the formation of fully cured thermosetting networks or thermoplastic polymers. Furthermore, different polymerization mechanisms can be involved in FP reactions, comprising cationic or anionic, ring-opening metathesis, and free-radical polymerization, among others. Further, it is possible to run FP reactions in bulk, in solution, or even using solid monomers if they are melted at the temperature of the front, notwithstanding the possibility of using reactive systems containing fillers or fiber/fabric reinforcements. In this context, the use of FP is becoming very important also for the design and production of advanced (nano)composite materials, saving processing time and achieving the completeness of the curing reaction, even in the presence of high filler/reinforcement loadings. Therefore, this mini-review aims to provide the reader with the basics of FP and its main peculiarities, even in the context of preparing high-performing composites. In this respect, some recent case studies witnessing the potentialities of frontal polymerization for the design of advanced (nano)composite systems will be elucidated. Finally, some perspectives about possible future developments will be proposed.
Autor:innen und Institutionen
- Politecnico di Torino, Department of Applied Science and Technology, Viale Teresa Michel 5, 15121 Alessandria, Italy.
- University of Sassari, Department of Chemical, Physical, Mathematical, and Natural Sciences, Via Vienna 2, 07100 Sassari, Italy.
ORCID-Profile: Giulio Malucelli, Alberto Mariani
Förderung
- European Commission
- Ministero dell'Università e della Ricerca
- Università degli Studi di Sassari
Zitieren
APA
Malucelli, G., & Mariani, A. (2024). Frontal Polymerization for the Rapid Obtainment of Polymer Composites. ACS Omega, 9(24), 25448-25456. https://doi.org/10.1021/acsomega.4c03017
Vancouver
Malucelli G, Mariani A. Frontal Polymerization for the Rapid Obtainment of Polymer Composites. ACS Omega. 2024;9(24):25448-25456. doi:10.1021/acsomega.4c03017
BibTeX
@article{Malucelli2024,
author = {Malucelli, Giulio and Mariani, Alberto},
title = {Frontal Polymerization for the Rapid Obtainment of Polymer Composites},
journal = {ACS Omega},
year = {2024},
volume = {9},
number = {24},
pages = {25448--25456},
doi = {10.1021/acsomega.4c03017}
}
EUVIMED