Ultra‐Fast Preparation of High‐Strength Polymer Concrete via Frontal Polymerization at Room Temperature
Small Methods · 24.04.2024
DOI: 10.1002/smtd.202301569 ↗Kurz gefasst
Fachartikel in der Zeitschrift Small Methods, online erschienen am 24.04.2024. Verfasst von Jiongfeng Sun und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Harbin Institute of Technology, Harbin, 150090, China. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Key Research and Development Program of China.
Abstract (Originalsprache)
Concrete, in particular application scenarios, such as crack repair, disaster rescue and relief, and 3D printing, needs to be cured quickly. In this work, a novel synthesis strategy, UV‐initiated frontal polymerization (FP), for fast preparation of high‐strength polymer concrete at room temperature is proposed, and the whole fabrication progress within several minutes, in which coarse aggregates and a small amount of short carbon fibers (CF) are used to enhance mechanical properties and heat conduction and reduce the amounts of chemical adhesives. SEM, DSC, MIP, Ultra depth of field microscope, and Rheometer are employed to characterize the properties of chemical adhesives, polymer concrete, and polymerization process. In addition, the finite element method is used to investigate the internal temperature field status of the FP process. The results indicate that the compressive and flexural strengths of the polymer concrete with 1.0 wt%‐1 mm‐CF‐50 vol.%‐quartz sand exceeded 70 and 20 MPa, respectively, in which the average self‐propagation velocity reached 58 mm min −1 . The investigation provides a promising approach for the rapid construction of structural facilities, emergency repair after disasters, 3D printing concrete, etc.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil Engineering, Harbin Institute of Technology, Harbin, 150090, China.
- Key Lab of Structures Dynamic Behavior and Control of the Ministry of Education, Harbin Institute of Technology, Harbin, 150090, China.
- Key Lab of Smart Prevention and Mitigation of Civil Engineering Disasters of the Ministry of Industry and Information Technology, Harbin Institute of Technology, Harbin, 150090, China.
ORCID-Profile: Guofu Qiao
Förderung
- National Key Research and Development Program of China
Zitieren
APA
Sun, J., Wang, R., Xue, G., & Qiao, G. (2024). Ultra‐Fast Preparation of High‐Strength Polymer Concrete via Frontal Polymerization at Room Temperature. Small Methods. https://doi.org/10.1002/smtd.202301569
Vancouver
Sun J, Wang R, Xue G, Qiao G. Ultra‐Fast Preparation of High‐Strength Polymer Concrete via Frontal Polymerization at Room Temperature. Small Methods. 2024. doi:10.1002/smtd.202301569
BibTeX
@article{Sun2024,
author = {Sun, Jiongfeng and Wang, Rui and Xue, Guangjie and Qiao, Guofu},
title = {Ultra‐Fast Preparation of High‐Strength Polymer Concrete via Frontal Polymerization at Room Temperature},
journal = {Small Methods},
year = {2024},
doi = {10.1002/smtd.202301569}
}
EUVIMED