EUVIMEDEUVIMED entdecken
Crossref

Pool boiling heat transfer enhancement using nanofluids on structured surfaces

Suryaji S. Kale, Sonal S. More, M. B. Kulkarni, B. R. Birajdar, A. S. Dhobale, K. A. Shaikh

Journal of Thermal Engineering · 17.07.2026

DOI: 10.47481/jten.0051 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal Engineering, erschienen am 17.07.2026. Verfasst von Suryaji S. Kale und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improvement in heat-transfer performance is a major requirement in contemporary thermal management systems, particularly in high-heatflux applications. The application of nanofluids combined with surface modification methods has emerged as a viable measure to counter the shortcomings of traditional heat-transfer fluids. This study experimentally investigates the effects of nanoparticle concentration and surface geometry on convective heat-transfer characteristics. Graphene nanofluids with three volume fractions (0.2, 0.5, and 1) were prepared, and experiments were conducted on plain, V-structured, and square-structured surfaces. Thermal transfer properties were measured at heat inputs of 56 W, 72 W, and 90 W. The results show that the volume fraction of nanoparticles in the suspension always increases with the heat transfer coefficient, irrespective of surface arrangement. The heat transfer coefficient was also high for heat input at a given volume fraction. Structured surfaces exhibited substantially better thermal performance than plain surfaces because they more effectively disrupted the thermal boundary layer and induced greater flow disturbance. The heat transfer coefficient of the plain surface at a nanoparticle volume fraction of 1 percent and a heat input of 90 W was 28.19 W/m2oC, the V-structured and square-structured surfaces recorded 36.145 W/m2oC and 52.21 W/m2oC, respectively. This corresponds to heat transfer improvements of 28.2% and 85.20% on the V-structured and square-structured surfaces, respectively, compared with the plain surface. The research proves that the hybrid application of graphene-based nanofluids and surface structuring significantly enhances the heat-transfer performance and that surface structuring with the square form is most promising for high-end thermal-performance applications. The novelty of the present work lies in experimentally comparing pool-boiling heat-transfer performance of graphene nanofluids on plain, V-grooved, and square-structured heating surfaces under identical test conditions, thereby highlighting the influence of simple, manufacturable surface geometries on boiling enhancement.

Zitieren

APA

Kale, S. S., More, S. S., Kulkarni, M. B., Birajdar, B. R., Dhobale, A. S., & Shaikh, K. A. (2026). Pool boiling heat transfer enhancement using nanofluids on structured surfaces. Journal of Thermal Engineering. https://doi.org/10.47481/jten.0051

Vancouver

Kale SS, More SS, Kulkarni MB, Birajdar BR, Dhobale AS, Shaikh KA. Pool boiling heat transfer enhancement using nanofluids on structured surfaces. Journal of Thermal Engineering. 2026. doi:10.47481/jten.0051

BibTeX
@article{Kale2026,
  author = {Kale, Suryaji S. and More, Sonal S. and Kulkarni, M. B. and Birajdar, B. R. and Dhobale, A. S. and Shaikh, K. A.},
  title = {Pool boiling heat transfer enhancement using nanofluids on structured surfaces},
  journal = {Journal of Thermal Engineering},
  year = {2026},
  doi = {10.47481/jten.0051}
}
Kostenlos starten →