EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

PLA Feedstock Filled with Spent Coffee Grounds for New Product Applications with Large-Format Material Extrusion Additive Manufacturing

Martina Paramatti iD, Alessia Romani iD, Gianluca Pugliese, Marinella Levi

ACS Omega · 13.02.2024 · 9 (6) · 6423-6431

DOI: 10.1021/acsomega.3c05669 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ACS Omega, online erschienen am 01.02.2024. Verfasst von Martina Paramatti und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Materials, and Chemical Engineering "Giulio Natta", Piazza Leonardo Da Vinci 32, 20133 Milano, Italy. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Food waste and loss generate significant waste such as spent coffee grounds (SCGs) from coffee consumption. These byproducts can be valorized by following circular economy and bioeconomy principles, e.g., using SCGs in polymer-based composites for 3D printing. Although desktop-size material extrusion additive manufacturing is increasingly adopted for biomass-polymer-based composites, the potential of large-format direct extrusion 3D printing systems remains unexplored. This work investigated the thermal, rheological, and mechanical properties of PLA/SCG composites for applications with a large-format pellet extrusion 3D printer. The formulations exhibit minimal degradation at typical 3D printing temperatures of PLA, i.e., ∼190 °C, and limited effects on crystallinity by increasing the SCG weight percentage. The decrease in viscosity due to SCGs improves the printability and layer adhesion, as confirmed by the tensile test results, such as higher ultimate tensile strength and elongation at break values compared to those of the state-of-the-art values. Using pellet feedstocks contributes to limiting the effects of thermomechanical degradation by reducing raw material processing, i.e., avoiding filament extrusion. Using PLA/SCGs formulations was demonstrated through 3D printed complex parts with nonplanar slicing techniques, including a large-scale furniture product, validating large-format pellet extrusion 3D printers for scaling up the use of biomass-filled polymers.

Autor:innen und Institutionen

  • Department of Chemistry, Materials, and Chemical Engineering "Giulio Natta", Piazza Leonardo Da Vinci 32, 20133 Milano, Italy.
  • Design Department, Via Durando, 20158 Milano, Italy.
  • LowPoly SL, Avenida Real de Pinto 91, Nave 07, 28021 Madrid, Spain.

ORCID-Profile: Martina Paramatti, Alessia Romani

Zitieren

APA

Paramatti, M., Romani, A., Pugliese, G., & Levi, M. (2024). PLA Feedstock Filled with Spent Coffee Grounds for New Product Applications with Large-Format Material Extrusion Additive Manufacturing. ACS Omega, 9(6), 6423-6431. https://doi.org/10.1021/acsomega.3c05669

Vancouver

Paramatti M, Romani A, Pugliese G, Levi M. PLA Feedstock Filled with Spent Coffee Grounds for New Product Applications with Large-Format Material Extrusion Additive Manufacturing. ACS Omega. 2024;9(6):6423-6431. doi:10.1021/acsomega.3c05669

BibTeX
@article{Paramatti2024,
  author = {Paramatti, Martina and Romani, Alessia and Pugliese, Gianluca and Levi, Marinella},
  title = {PLA Feedstock Filled with Spent Coffee Grounds for New Product Applications with Large-Format Material Extrusion Additive Manufacturing},
  journal = {ACS Omega},
  year = {2024},
  volume = {9},
  number = {6},
  pages = {6423--6431},
  doi = {10.1021/acsomega.3c05669}
}
Kostenlos starten →